MCB/TM quick-release couplings for remote handling Nuclear | Non-spill

Antipollution technology...

... for your confinement cell applications Antipollution technology Just push to connect With non-spill flush faces, the MCB/TM "Clean-break", non-spill connector prevents air from entering the mechanism will give you the ease of circuits during connection and avoids any handling required for repeated connection contamination of the confinement cell to all your confinement cells. meet the requirements of your during disconnection. Material traceability Corrosive fluid connections Easy remote handling Decontamination fluid Specifically designed for remote handling: Square body for enhanced pincer...

Technical characteristics Maximum allowable pressure PS (bar) Minimum and maximum allowable temperatures TS (°C) depending on seal material: - Ethylene-Propylene (EPDM) - Fluorocarbon (FPM) - Perfluoroelastomer (FFKM) Shut-off Mainly stainless steel 316 series. As standard: Ethylene-Propylene (EPDM) seals, JE code. Optional: replace the JE code with the corresponding seal code in the part numbers For more information, consult us. pages 6 and 7. - thylene-Propylene PMUC version: JE/UC code E - luorocarbon (FPM): JV code F - erfluoroelastomer (FFKM): JK code P Remote handling data Socket for remote...

Hydraulic flow rate / pressure drop charts MCB 05/TM MCB 08/TM MCB 12TM MCB 16/TM Test conditions: - luid: water (998 kg/m3; F 1,08 cSt) - irection of flow: D Socket Plug Hydraulic flow (l/min) Flow (l/min) for a speed of 5 m/s: MCB 03/TM 2.1 Pneumatic flow rate / pressure drop charts MCB 05/TM MCB 08/TM MCB 12TM MCB 16/TM Test conditions: - Fluid: air - Inlet pressure: 6 bar - irection of flow: D Socket Plug

PART NUMBERS Configuration Sockets for remote handling and fixed plugs TM sockets Dimensions (mm) A Stäubli remote handling solution for each application - RBE/TM for liquids and gases, - Non-spill MCB/TM for liquids and gases, - Very high presssure THX/TM for supply of hydraulic shears during dismantling in cells, - Full-flow UPB/TM for contaminated fluid transfer. Don't hesitate to call your Stäubli senior sales engineer to discuss the most suitable solution for your application meeting your specific requirements.

PART NUMBERS Fixed plugs Dimensions (mm) Part numbers KES sealing kit - Stainless steel 316 series Thread F Part numbers with Ethylene-Propylene seals Other seal material - Ethylene-Propylene PMUC version: JE/UC code - Perfluoroelastomer (FFKM): JK code Part numbers that are compatible with this option are indicated with the Retaining ring + O-ring seal Replace the JE code with the corresponding seal code: in the part number tables on pages 6 and 7. Find all our KES rings in the KES P 003 brochure. Overall dimensions in connected position Model MCB 03 MCB 05 MCB 08 MCB 12 MCB 16

Stäubli Units Representatives / Agents Global presence of the Stäubli Group www.staubli.com Staubli is a trademark of Stäubli International AG, registered in Switzerland and other countries. © Stäubli 26/11/2021. We reserve the right to modify product specifications without prior notice. Photo credits: Adobe Stock, Stäub