Stäubli HPX non-spill range specially designed for high pressure pulsating or vibrating hydraulic lines. Non-spill, flush face design With non-spill flush faces, the HPX connector prevents the introduction of air into the circuits and any contamination of the working area. Easy connection Protective seals The pre-guiding system of the plug into the socket eases the connection of hydraulic hoses. • sealing barrier protects the main seal A from dirt. Safe claw locking mechanism • he retractable locking sleeve (HPX 08 T to HPX 25) and the flush face design facilitate effective cleaning before coupling....

Protective dust caps N • itrile, Fluorocarbon, Polyurethane for mineral or synthetic oil hydraulic circuits. To protect the socket and plug in disconnection position. E • thylene-Propylene for glycol water and Skydrol ® circuits. 2 materials available: F • rom HPX 08 to HPX 25: Chloroprene F • rom HPX 08 to HPX 33: anodised light alloy Convenient locking system L • ocking sleeve with both threaded (M 8) and plain holes for tommy bar for ease of tightening. F • or large diameters, HPX 20 to HPX 33 may be ordered with integrated handwheel. The light alloy caps for HPX 08 to HPX 25 come in 4 colours:...

Technical characteristics HPX 08 Max. working pressure (bar) Flow path (mm) Shut-off Leak tightness Working temperature • Standard - Nitrile (NBR) seals. With light alloy caps • Mineral or synthetic hydraulic oils - Nitrile (NBR) seal - Fluorocarbon (FPM) seal - Polyurethane (PU)* seal • Glycol water, Skydrol ® - Ethylene-Propylene (EPDM)** seal • ptional O - Fluorocarbon (FPM) seals - Polyurethane (PU)* seals - thylene-Propylene (EPDM)** E seals With Chloroprene (CR) caps - 20 °C to + 100 °C * Use of this seal with water-based fluids is not allowed. ** se or any contact of this seal with other...

Flow rate/pressure drop charts Zone B: Nitrile, Fluorocarbon and Polyurethane seals Zone C: Polyurethane seals Test conditions: - direction of flow: socket —► plug Hydraulic flow rate (l/min) Hydraulic flow rate (l/min)

Part-numbers Sockets 1. Socket female thread Connection C or pipe outside Ø P 2. anel mount socket female thread UN 1 5/8 - 12 (a) M 20 x 1,5 for pipes with tubes outside Ø 12 mm M 24 x 1,5 for pipes with tubes outside Ø 16 mm M 24 x 1,5 for pipes with tubes outside Ø 16 mm M 30 x 2 for pipes with tubes outside Ø 20 mm M 36 x 2 for pipes with tubes outside Ø 25 mm M 42 x 2 for pipes with tubes outside Ø 30 mm M 55 x 2 for pipes with tubes outside Ø 38 mm S 3. ocket male thread for hydraulic pipes with 24° taper according to ISO 8434-1 series S Length of connected socket and plug: add L1 of the...

Connection C or pipe outside Ø 4. Plug female thread 5. anel mount plug P female thread UN 1 5/8 - 12 (a) M 20 x 1,5 for pipes with tubes outside Ø 12 mm M 24 x 1,5 for pipes with tubes outside Ø 16 mm M 24 x 1,5 for pipes with tubes outside Ø 16 mm M 30 x 2 for pipes with tubes outside Ø 20 mm M 36 x 2 for pipes with tubes outside Ø 25 mm M 42 x 2 for pipes with tubes outside Ø 30 mm M 55 x 2 for pipes with tubes outside Ø 38 mm 6. lug male thread for hydraulic pipes P with 24° taper according to ISO 8434-1 series S (a): leak tightness profile according to standard SAE J 1926-1. HPX 20 to HPX...

Global presence of the Stäubli Group Stäubli units Agents International sales coordination Stäubli Faverges - CS 30070 - F - 74210 Faverges - Tel.: +33 4 50 65 67 97 - Fax: +33 4 50 65 60 69 - E-mail: [email protected] www.staubli.com Staubli is a trademark of Stäubli International AG, registered in Switzerland and other countries. © Stäubli 10/03/2015. Printed on FSC paper. We reserve the right to modify product specifications without prior notice. Photocredits: Stäubli. For contact details: www.staubli.com/connectors/co