FAST MOVING TECHNOLOGY Utilities, laboratory connections Test bench How to build your part number P.11

Clean break, vibration resistant stainless-steel automatic coupling for all fluids How Stäubli design enhances your performance Non-spill & flat faces Ergonomic design No air introduction into the circuits on Compact and easy to handle. connection and no loss of liquid on disconnection. Options A large choice of options to enhance even Bayonet lock more security and ergonomy. Totally reliable and provides excellent resistance to vibration. Elastomers A large choice of elastomers for a wide Internal design compatibility with the majority of fluids Optimum flow and high-quality surface finish (Ra...

Technical characteristics Shut-off double — (1) When using JS3 seals, limited to 50 bar (2) For other pressures, please contact us (3) For hazardous gases, as defined in the directive 2014/68/UE, please consult us for the maximum operating pressure (1) Without dust caps or with stainless steel dust caps, depending on the seal material. Temperature range of plastic dust cap -20°C to +100 °C (2) For use out of the indicated temperature range, please consult us (3) Important ! Never use Ethylene-Propylene seals with fluids of mineral origin (oil, fat etc...) (4) Elastomer available with FDA requirements...

Technical characteristics Flow rate / pressure drop hydraulic charts Hydraulic flow (L/min) Test conditions • Fluid: water • Density: 998 kg/m3 • Viscosity: 1,08 cSt • Flow direction: plug to socket High Clean Break

Part numbersSocket Female thread BSP Male BSP thread with 60° sealing cone Male thread UNF JIC 37° flared fitting *Sealing cone only available on Male BSP thread High Clean Break - HCB 5

Part numbersBulkhead socket 2 flats ‘Sealing cone only available on Male BSP thread “Triclamp” profile: on request. High Clean Break - HCB 6

Part numbersBulkhead socket Male thread UNF JIC 37° flared fitting For calibrated stainless steel tubes Characteristics of the stainless tubes: according to standards ISO 1127 class D4 and ASTM A 269 class 1 (assembling instruction RV1300100) Bulkhead socket installation “Triclamp” profile: on request. High Clean Break - HCB 7

Part numbersPlug Female thread BSP Female thread NPT Female thread UNF* Male BSP thread with 60° sealing cone Male thread NPT “Triclamp” profile: on request. 'Sealing cone only available on Male BSP thread High Clean Break - HCB 8

Part numbersPlug Model H/flats Standard part numbers Male thread UNF JIC 37° flared fitting For calibrated stainless steel tubes Characteristics of the stainless tubes: according to standards ISO 1127 class D4 and ASTM A 269 class 1 (assembling instruction RV1300100) Overall dimensions in connected position “Triclamp” profile: on request. High Clean Break - HCB 9

Options &additional equipment Mechanical and color key locking 3, 45, 6 or 9 option Thanks to visual and mechanical coding, these security options allow you to avoid any cross connections. This option allows immediate visual identification of your circuits for recessed connectors. We offer a wide variety of elastomers to best meet your needs. Stainless steel dust caps BM option These caps are made to best suit to corrosive environment. Handwheel VT option This stainless steel handwheel was developped for greater handling comfort. Available for plug DN16 and 20. Regulations • OX: product prepared...

To construct your part number, add to the standard part number (in the order shown below) the type of seal and any options. Example of a complete part number with options: HCB XX.XXX / IC / JV / OX/ 3 / KR/ BM / VT Standard part number —► P. 5 • Seals: nitrile other than Nitrile • Ethylene-propylene (EPDM) • Perfluoroelastomer (FFKM) 3- Regulatory option —► P.10 code Mechanical & -► P.10 color key locking Colored plates for bulkhead sockets • Stainless steel dust caps Handwheel —► P.10 only for HCB 16 and 20 • Stainless steel handwheel

# Staubli Units O Representatives / Agents