GMV08/C receptacles CNG (Compressed Natural Gas) vehicles Product overview Technical characteristics Part numbers

Key advantagesGuarantee operator and installation safety How Staubli design enhances your performanceResistant and reliable materials • Mainly stainless steel construction • Cycle tested to withstand more than 10,000 connections contamination prevention • Internal technology of the plug reduces vibration intensity caused by fluid passage during refueling • Dust cap supplied to keep dust and water from entering the fuel system • The receptacles are tested individually in connected and disconnected positions • Leak-free at low and high pressure, whatever the temperature • Check valve prevents flow...

Technical dataImportant: The gas must be dry and clean. Internal diameter (mm) Material • Mainly stainless steel • All Staubli receptacles can be used with any Staubli nozzle or with any nozzle complying with the NGV 1 (P30) and ISO 14469 (B200) requirements Bulkhead Male thread Dust cap Hi/flats R03890100 Every receptacle is delivered with dust cap Other dust caps available on request, contact us. For instructions of installation and use and for technical characteristics of stainless tube, see instructions sheet RV1230100.

••• •••••••• • Staubli Units O Representatives / Agents Staubli is a trademark of Staubli International AG, registered in Switzerland and other countries. © Staubli 26 /03/2025. We reserve the right to modify product specifications without prior notice.