Catalogs >
Stäubli Fluid Connectors >
DAG Thermal management

DAG Thermal management
4Pages

Catalog excerpts

DAG quick-release couplings Thermal management

Quick and secure connections for your cooling circuits Non-drip to ensure cleanliness and Fluids Visual circuit identification Coloured markings (blue /KB and red Glycol water The flat-faced design guarantees a Cooling liquids perfect tightness and total safety at the input and output circuits to ensure a heart of your processes: reliable, tight and secure connection Data Centre Internet switch between cooling circuits. No contamination of the environment due to fluid loss. High performance computer allow operators to easily identify Suitable for electrical and high voltage environments....

Open the catalog to page 2

Technical characteristics Nominal diameter DN (mm) Max. allowable pressure PS (bar) Minimum and maximum allowable temperatures TS (°C) Shut-off Stainless steel Sealing Type of seals: Ethylene-Propylene (EPDM) Important ! The use and any contact of the Ethylene-Propylene (EPDM) seal with fluids of mineral origin (oil, fat… etc.) are not advised. Hydraulic flow rate / pressure drop charts V = 5 m/s Test conditions: Fluid: water Direction of flow: socket Part numbers Model Male thread socket Male thread plug Overall dimensions in connected position L = (L1 socket + L1 plug) - X

Open the catalog to page 3

Stäubli Units Global presence of the Stäubli Group www.staubli.com Staubli is a trademark of Stäubli International AG, registered in Switzerland and other countries. © Stäubli 10/05/2022. We reserve the right to modify product specifications without prior notice. Photocredits: Adobe Stock, S

Open the catalog to page 4