Catalogs >
Stäubli Fluid Connectors >
CGD Thermal management

CGD Thermal management
8Pages

Add to favorites

Catalog excerpts

CGD quick-release couplings Thermal management

Open the catalog to page 1

Flush face technology…

Open the catalog to page 2

Non spill flush face technology guarantees the integrity of the fluid No pollution can enter the circuit on connection. Non-drip to ensure cleanliness and safety of installations and operators. Thanks to the CGD connector, the circuit is automatically closed upon disconnection: ■ No contamination of the environment due to fluid loss ■ Suitable for electrical and high voltage environments Performance and reliability ■ High flow volume ■ Resistance to vibration and corrosion ■ Designed to withstand numerous connection sequences. Applications ■ High performance computer ■ Data center ■ Medical...

Open the catalog to page 3

Displacement technology A solution suitable for guiding systems with a maximum misalignment of 1 mm. Maximum distance between 2 axes: 1 mm Distance maxi. entre les 2 axes : 0.5 mm The opportunity to spend less and contribute to a sustainable development programme. With Stäubli, you can rely on the performance of your equipment, reliability of long-term investments and no workplace pollution. CGO à double oscillation (raccord oscillant + about oscillant) ou CGO à simple oscillation (raccord non oscillant + about oscillant

Open the catalog to page 4

Technical characteristics Construction: aluminium alloy with surface treatment Type of seal Seal code -40° to +175° (down to -50° depending on the fluid) To select the type of seal on your CGD sockets and plugs, add the «seal code» to the end of the part number. E.g.: CGD 05.2416/JV for a CGD with fluorocarbon seals. CGD 03 Connection force without pressure (N) Repulsion cross section (cm²) Fluid loss on disconnection (cm3) Nominal diameter DN (mm) Brass Maximum allowable pressure PS (bar) Aluminium Minimum and maximum allowable temperatures TS (°C) Aluminium socket module plug Test...

Open the catalog to page 5

Part numbers Socket Designation Part numbers Aluminium Part numbers Aluminium Part numbers Aluminium Add the seal code to the end of the part number. Types of seal Seal code

Open the catalog to page 6

misalignment d mechanical stop: b Installation drawing reference misalignment d mechanical stop: b Installation drawing reference Plug installation into recessed pocket Machining plans available on request.

Open the catalog to page 7

Stäubli units Global presence of the Stäubli Group www.staubli.com Staubli is a trademark of Stäubli International AG, registered in Switzerland and other countries. © Stäubli 27/09/2018. We reserve the rights to modify product speciﬁcations without prior notice. connectors.mkg@staubli.com | Photos crédits: St

Open the catalog to page 8