CEB: the «unbreakable» connector suitable for high vibrating environments. Exceptionally strong, CEB connectors withstand falls and shocks. Their design ensures resistance to hydrocarbons and fuels. Electrical connector for power applications up to 1000V and 1200A. Suitable for conventional combustion engines, hybrids and electric vehicles. Permanent electrical contact, with advanced electrical strip technology. • The contact strips are slightly curved acting along the connection pin. Ensuring: - a substantial contact area (not just a single contact point) - a reliable connection even if the...

Foolproof keying system Misconnection eliminated: coupling in one position only. Reliable connections CEB connectors are designed to ensure a high integrity connection, especially in high vibrating environments. CEB connectors can be fixed using either hook and loop tape, screws or pins. Easy installation • cable attachment by crimping or • cable attachment with re-useable Axiclamp technology: allowing attachment of cable without crimping. The strands of the connection cable are clamped by a sleeve screwed onto a metal cone (this is an integral part of the contact body). sight hole Contact element...

- silvered aluminium Technical characteristics • IP 55 in connected position (with heat shrink shroud form) hmnt <J*.n4Jng CUTMA with ifcjon* cit>%. Curvrtl da-ratlng cwvti with llhconi ciMa.

2 pole connectors: size 2 (for cable from 6 to 25 mm²) Housing equipped with 2 pins. Housing equipped with 2 sockets. The connectors with Axiclamp technology are designated by the symbol

2 pole connectors: size 3 (for cable from 25 to 50 mm²) Housing equipped with 2 pins. Housing equipped with 2 sockets. The connectors with Axiclamp technology are designated by the symbol Silicon insulated multistrand cables Highly flexible stranded cable with reinforced insulation. Super-fine wire, oxygen free Cu strand. Nominal Strand cross section design 2 (mm ) n x Ø (mm) Thickness Outer insulation diameter wall (mm) (mm) Available colours* Partnumbers (10 meter roll) *The cables are delivered in translucent colour as standard. For black version, add /KN at the end of the part-numbers. For...

3 pole connectors: size 3 (for cable from 25 to 50 mm²) Housing equipped with 3 pins. Housing equipped with 3 sockets. The connectors with Axiclamp technology are designated by the symbol Tools Description Hydraulic Crimping pliers Insert 10 mm2 cross-section conductor For electrical crimping pliers: please contact us

Global presence of the Stäubli Group Stäubli units Agents International sales coordination Stäubli Faverges - CS 30070 - F - 74210 Faverges - Tel.: +33 4 50 65 67 97 - Fax: +33 4 50 65 60 69 - E-mail: [email protected] www.staubli.com Staubli is a trademark of Stäubli International AG, registered in Switzerland and other countries. © Stäubli 28/04/2015. Printed on FSC paper. We reserve the right to modify product specifications without prior notice. Photocredits: Stäubli - Karin Creuzet For contact details: www.staubli.com/connectors/co