Catalogs >
Stäubli Fluid Connectors >
CBI - Cooling and temperature regulation

CBI - Cooling and temperature regulation
12Pages

Add to favorites

Catalog excerpts

CBI - Cooling and temperature regulation - 1

CBI quick-release couplings Cooling | Temperature regulation

Open the catalog to page 1

CBI - Cooling and temperature regulation - 2

Non-spill flat-face pollution preventing technology…

Open the catalog to page 2

CBI - Cooling and temperature regulation - 3

… ensures seal integrity Ease of connection Applications ■■ ■■ ■■ ■■ Cold water, water glycol, hot water, steam Mineral or synthetic heat transfer oil Lubricating oil Gas circuits: argon, nitrogen, helium, etc. High mechanical strength Front sealing is provided by a seal fitted The robust construction provides the CBI into the back adapter on all cylindrical with high strength to withstand mechani- male plugs. cal stresses (vibrations, oscillations, etc). Option to install plug into recessed pocket (see page 6). KES sealing kits are available Automatic locking and compact design CBI...

Open the catalog to page 3

CBI - Cooling and temperature regulation - 4

Technical data Maximum allowable pressure PS (bar) Standard version: brass and stainless BF option: all the parts in the fluid path are Plug dust cap: chloroprene (CR) Ethylene-Propylene (EPDM)* constructed in stainless steel. See part Perfluoroelastomer (FFKM) in the fluid number tables. path Other seal materials available on request. Minimum and maximum allowable temperatures without dust cap Type of flow Minimum and maximum allowable temperatures TS (°C) Cold or hot water, hydraulic and mineral oils Perfluoroelastomer (FFKM) Water glycol Ethylene-Propylene (EPDM) * Ethylene-Propylene...

Open the catalog to page 4

CBI - Cooling and temperature regulation - 5

Hydraulic flow rate / pressure drop chart S peed of flow less than or equal to 5 m/s: all seals V = 5 m/s V = 10 m/s Test conditions: ■■ Fluid: water ■■ Direction of flow: plug socket S peed of flow between 5 and 10 m/s: - Nitrile and Fluorocarbon seals - temperatures ≤ 60 °C Flow (l/min) Flow (l/min) Test conditions: ■■ Fluid: water ■■ Direction of flow: plug socket Flow (l/min)

Open the catalog to page 5

CBI - Cooling and temperature regulation - 6

CBI 03 to CBI 25 Test conditions: ■■ Inlet pressure: 6 bar ■■ Direction of flow: plug socket Pneumatic flow rate / pressure drop charts Installation of plug into recessed pocket Cylindrical male threaded plugs can be is essential to use the enhanced shoulder fully flush-fitted into a recessed pocket. locking ring type CBI sockets. Enhanced shoulder locking When recess mounting CBI 06 and 09 plugs, to improve grip on disconnection, it sockets Add the code VP to the CBI 06 or CBI 09 socket part number on pages 7 and 8. Ex.: CBI 06.1101/IA/VP Machining drawings for recessed installation...

Open the catalog to page 6

CBI - Cooling and temperature regulation - 7

Part numbers Sockets Designation Female thread H/flats Standard 90° female thread (not available for NPT thread) Male thread (not available for M 16 x 1.5 thread)

Open the catalog to page 7

CBI - Cooling and temperature regulation - 8

Part numbers Sockets 90° male thread ( not available for M 16 x 1.5 thread) CBI 06 Part numbers H/flats Standard

Open the catalog to page 8

CBI - Cooling and temperature regulation - 9

Plugs Designation Female thread BSP male thread with 60° cone and integrated sealing Extended, BSP male thread with 60° cone and integrated sealing

Open the catalog to page 9

CBI - Cooling and temperature regulation - 10

Part numbers Plugs Dimensions (mm) Designation Panel mount, BSP male thread with 60° cone Part numbers Conical male thread CBI 06

Open the catalog to page 10

CBI - Cooling and temperature regulation - 11

Additional equipment KES sealing kits Protective dust caps (To be ordered separately) Available for all models in this range. Socket dust cap part number: CBI xx.8500 KES sealing kits consist of a retaining Select the specific ring and seal materials ring and an O-ring to create a perfect for your application, using our new seal between the socket and its base. Part numbers that are compatible with this option are indicated with the symbol in the part number tables on pages 7 and 8. Kits d’étanchéité KES Tous fluides Plug dust cap part number: CBI xx.8550 KES kits can be ordered separately...

Open the catalog to page 11

CBI - Cooling and temperature regulation - 12

Stäubli units Global presence of the Stäubli Group www.staubli.com Staubli is a trademark of Stäubli International AG, registered in Switzerland and other countries. © Stäubli 23/10/2018. We reserve the right to modify product speciﬁcations without prior notice. Connectors.mkg@staubli.com | Photocredits: Stä

Open the catalog to page 12