RC- WIRELESS WIRELESS STACK LIGHTS
52Pages

RC- WIRELESS STACK LIGHTS STACK-LIGHT.COM 4942 AUSTIN PARK DRIVE BUFORD, GA 30518 (678) 288-9678

Wireless Stack Lights and Controls Stack-Light.com offers a variety of wireless products. This line is designed to be configurable for your unique application. The wireless units are all built to work together so you can build a system that works for your project. You can start with a simple light and remote and additional devices can be added to your system in the future. In the simplest system would be a light and a remote paired to work together. In a more advanced application, there could be multiple transmitters controlling a single light. Lights can be activated by a PLC or even a...

RC-SL60 Wireless Stack Light The RC-SL60 Light is the basic building block of the RC Stack-Light system. This light can be configured with 1-5 colors. They can be configured to have the lights flashing our steady. They have a built-in buzzer than can be enabled or not. These can be ordered with or without built in buttons. The RC-SL60C comes with buttons that can control itself and other devices. For instance, an application could have multiple RC lights controlled by a single push of a button. All the lights that are part of the team would be synchronized to display the same light status....

The RC-M Wireless Remotes are used to trigger the Wireless lights. The transmitters can be configured in a variety of combinations. Multiple transmitters can be used to turn on/off a single light, or many lights can be controlled my one transmitter. This flexibility allows you to set up a wireless system that works for your specific application. Each transmitter comes with LED’s that are synchronized with the wireless lights they control. This feature lets the transmitters act as a 2nd stack light and makes it possible to know the status of a light that may be located out of the line of...

RC-IO Wireless Inputs/Outputs The RC-IO units are used to trigger a light with a PLC,an existing piece of machinery or your own switches. The RC-IO can be ordered in a variety of configurations based on your specific needs. These can have up to 6 inputs and 6 outputs. These can be used in a variety of ways. RC-IO unit might be attached to an Injection Molding Machine and could trigger a light located in a Maintenance Technicians office. The RC-IO devices can be used to control other devices not made by Stack-Light. For instance, the inputs from one RC-IO unit could be attached to your own...

The RC-R unit is used to extend the range and make the wireless system more robust. In a situation where two units are more than 100 feet away a repeater may be necessary to extend the range. These repeaters can also be used to strengthen the signal between units that may be located on the other side of walls or obstacles that can block the signal. All wireless units act as repeaters except for a battery powered units.

RC-COM Stack Light Commander Gateway The RC-COM COM Commander is a powerful too tooll that can enable your Wireless system to show the status your devices on a large Bingo Board monitor or in an office. The devices can be setup into teams and can be turned on and off using the Commander program. The Stack light commander program come installed on a gateway that is connected through a USB port onto windows-based based computers. Each Commander can detect and track the status of up to 30 Wireless devices at a time. Multiple Commander programs can be running at the same time. There re are two...

The names of each wireless device can be changed to fit your application. The second way to view the status of the wireless devices is with the Map module. Enabling the Map feature makes it easy to display the lights and their status as they relate to your facility. This is easily done by loading a drawing of your facility's lay layout out into the program. The wireless devices can be positioned on your facilities map and locked into place. Multiple commander programs rograms can be running at the same time. This allows for the status of a facility to be viewed at more than one location.

Example Applications: Stack-Lights Wireless system is designed to be Flexible and easy to configure. Below you will find several typical arrangements. In the simplest application there would be a Remote and a Light that both share a network (NI) and be on the same team. A system might have many sets of these units that share a network but are on different teams. If the units are programmed to be on different teams, they will share the mesh network but operate independently. One Light Multiple Transmitters In this application several different transmitters can be programmed to control a...

One Transmitter Multiple Lights In this application a single transmitter would control multiple lights. All these lights and the transmitters would share a network and be on the same team. RC-IO Transmitter with Multiple Lights In this application a PLC, machine or external switches could be used to instruct the transmitter to turn on and off multiple lights. This arrangement is often used on automated machinery or CNC machinery where the light needs to be viewed out of the line of sight of the machinery. The RC-IO comes with a cord set with flying leads. These can be wired through dry...

Flexibility for the Future Every device is assigned to a Team when it is built. This is done by setting the Node (NI) attribute in the wireless module. This setting is programmed into the chip at StackLight.com. However, you can change your devices Team at your facility through an IOS, Android app or with the Stack-Light commander program. This gives you the flexibility to add additional devices to your system in the future. It also makes it possible for you to reconfigure your existing systems. Phone App - Configuration To switch a device from one Team to another you will need to install...

You can filter for the Stack light p products roducts using the filter feature located at the bottom of the App. Most Stack-Light Light products will start with RC or Light. Find the device that you want to change in the list of Blue Bluetooth devices. Select the device to change from the list. The password for Stack-Light Light devices is set to 49424942 at the factory.