Thermal PAD
27Pages

The TH-1620 offers both good thermal conductivity and a low degassing level. This is a polyurethane based product which is intended to fill spaces left free between a component and its heat spreader. - Automobile industry - Heat pipes - Player, hard disk - Optoelectronics - Electronics for mass markets - Electrical insulator - Without silicone - Rohs - UL94-HB - Cutting to required dimensions Thermal impedance @ 30psi (°C-In²/W) Density (g/cm³) Thickness available (inch) Standard sheet size (inch) Volume resistivity (ohm-cm) Sample tested: 1" x 1" thickness 0,118" Part number example: TH These tests were carried out in laboratory conditions which are not representative of working con

The TH-1100 is an ultra conformable material, reinforced by fiberglass on one side. Its flexibility can compensate large surface irregularities by limiting the compression force. Examples of applications: - Data processing - Hard disk, player - Heat pipes - LCD screen - Electrical insulator - Cutting to required dimensions- Naturally adhesive - UL94-V0 and Rohs Properties Part number example: TH 1 100 x Option : A = with PSA (+0,002") These tests were carried out in laboratory conditions which are not representative of working conditions.

The TH-1800 is a very flexible material. This characteristic allows great surface roughness to be compensated for by limiting the compressive force. - Data processing - Hard disk - LCD screen - Electrical insulator - UL94-V0 and Rohs - Naturally adhesive - Fiberglass reinforcement on thicknesses < 0,03" - Cutting to required dimensions Part number example : TH 1 800 x Option : 1 = With fiberglass reinforcement These tests were carried out in laboratory conditions which are not representative of working conditions.

Thermal impedance according to thickness: Compression (%) according to the compressive force (psi): These tests were carried out in laboratory conditions which are not representative of working conditions.

The TH-1810 is a moderately conformable material appropriate for economical applications. It has moderate thermal conductivity, and offers good electrical insulation. - Engine controls - Telecommunications - RD-RAM - Heat pipes - Electrical insulator - Economical - UL94-V0 and Rohs - Adhesive on 1 surface - Cutting to required dimensions - Fiberglass reinforcement recommended for th. < 0,03" Part number example : TH 1 810 x x Option : 1 = With fiberglass reinforcement - Option : A = With PSA (+0,002") Model PAD Thermal These tests were carried out in laboratory conditions which are not...

Thermal resistance and impedance according to thickness: Thickness (mm) — Impedance 10psi — Resistance 10psi These tests were carried out in laboratory conditions which are not representative of working conditions.

The TH-1820 is appropriate for economical applications. It has moderate thermal conductivity, and offers good electrical insulation and excellent compressibility. - Adhesive on 1 surface - Cutting to required dimensions - Fiberglass reinforcement recommended for th. < 0,03" - Engine controls - Telecommunications - RD-RAM - Heat pipes - Wi-fi system - Electrical insulator - Economical - UL94-V0 and Rohs Part number example: TH 1 820 x x Option : 1 = With fiberglass reinforcement These tests were carried out in laboratory conditions which are not representative of working conditions.

Thermal PAD Thermal resistance and impedance according to thickness: £ u o 01 u C (0 4-< I/I ‘1/5 01 oc Thickness (mm) Resistance 10psi — Impealanee lOpsi Pressure (psi) 5,0mmT 1,0mmT These tests were carried out in laboratory conditions which are not representative of working conditions.

The TH-1830 is a very flexible material. This characteristic allows great surface roughness to be compensated for by limiting the compressive force. It is an electrical insulator and is economical. - Data processing - Hard disk, player - Heat pipes - LCD screen - Electrical insulator - Economical - UL94-V0 and Rohs - Naturally adhesive - Fiberglass reinforcement on thicknesses < 0,03" - Cutting to required dimensions Part number example: TH 1 830 x Option : 1 = With fiberglass reinforcement 2 = Fiberglass carrier on one side Model PAD Thermal These tests were carried out in laboratory...

Resistance 10psi Résistance Thermique 10psi Compression (%) according to the compression pressure (psi) : These tests were carried out in laboratory conditions which are not representative of working conditions. Thermal resistance and impedance according to thicknes

The TH-1840 is a flexible material offering considerable compressibility. This characteristic allows considerable surface roughness to be compensated for - Data processing - Hard disk, player - RD-RAM - LCD screen - Heat pipes - Electrical insulator - Naturally adhesive - UL94-V0 and Rohs - Additional adhesive on 1 surface - Cutting to required dimensions - Fiberglass reinforcement recommended for th. < 0,03" Part number example: TH 1 840 x x Option : 1 = With fiberglass reinforcement These tests were carried out in laboratory conditions which are not representative of working conditions.

Thickness (mm) Resistance 10psi Résistance Thermique 10psi Compression (%) according to the compression pressure (psi) : These tests were carried out in laboratory conditions which are not representative of working conditions. Thermal resistance and impedance according to thicknes

The TH-1850 is a flexible material offering considerable conformability. This characteristic allows considerable surface roughness to be compensated for by limiting the compressive force. It is an electrical insulator, and is naturally adhesive - Additional adhesive on 1 surface - Cutting to required dimensions - Fiberglass reinforcement recommended for th. < 0,03" - Data processing - Hard disk, player - RD-RAM - LCD screen - Heat pipes - Electrical insulator - Naturally adhesive - UL94-V0 and Rohs Part number example: TH 1 850 x X Option : 1 = With fiberglass reinforcement These tests were...