Exhibit with us
*mydirectindustry  
English
  1. Catalogs
  2. STACEM
  3. Thermal Interface
video corpo

Thermal Interface

Thermal Interface
1 / 12 PagesView full catalog

Thermal Interface

Product catalog summary
Overview: The document outlines specifications and applications for thermal interface materials, emphasizing their thermal and electrical insulating properties. These materials are utilized in industries such as automotive, telecommunications, and aerospace.
TH-2100: This is a silicone film reinforced with fiberglass, ideal for low assembly pressure applications. It serves as an electrical insulator with consistent application. Key properties include a thermal conduction of 1.2 W/mK, thermal resistance of 1.18 K/W, and a temperature range from -40°C to +240°C.
TH-2200: A high thermal conduction film reinforced with fiberglass, designed for applications requiring high electrical insulation. It provides a thermal conduction of 5.0 W/mK and a breakdown voltage exceeding 5 KV.
TH-2300: This aluminum oxide-based interface offers high thermal conductivity, suitable for energy conversion and telecommunications. It features a thermal conduction of 2.5 W/mK and operates within a temperature range of -55°C to +240°C.
TH-2370: Known for its excellent electrical insulation, this interface is used in automotive and high voltage units. It has a thermal conduction of 1.8 W/mK and a breakdown voltage greater than 5 KV.
TH-2500: Provides high thermal conductivity and electrical insulation, with a thermal conduction of 3.5 W/mK and a breakdown voltage over 1.4 KV.
TH-2800 and TH-2900: These are polyurethane thermal interfaces with good puncture resistance and electrical properties. TH-2800 has a thermal conduction of 1.8 W/mK, while TH-2900 offers 6 W/mK.
Standard Models: The document details dimensions and configurations for various models, including TO-3, TO-66, and RH series, specifying measurements for different applications.
Key Features: All materials comply with RoHS and meet UL94 V0 standards. Options include adhesive on one or both sides and customization to required dimensions.
See more

Catalog excerpts

Thermal Interface-1

Thermally conductive insulators CébéPhot The thermal interface TH-2100 is a silicone film reinforced with fiberglass. It is an electrical insulator, and is used for applications that require low assembly pressure. Unlike thermal grease and paste, its application is repeatable. - Energy conversion - Power semiconductors - Automobile - Motorisation - Electrical insulator - Does not run - Compensates for microscopic surface roughness - Adhesive on 1 or 2 sides - Cutting to required dimensions Thermal impedance @ 10psi (°C-In²/W) Tensile strength (N/mm²) Density (g/cm³) Volume resistivity (ohm-cm) Breakdown voltage (KV) Temperature range Thickness available (mm) Standard sheet size Part number example: TH x x xxx Standard cutting reference Option : 1 = With PSA 2 = One adhesive on each side (Add +0,05mm per PSA) Thickness : 1 = 0,250mm 2 = 0,450mm Model Thermally conductive insulators Thermal These tests were carried out in laboratory conditions which are not representative of working conditions.

 Open the catalog to page 1
Thermal Interface-2

Thermally conductive insulators CébéPhot The TH-2200 is a film with high thermal conduction reinforced with fiberglass. It is an electrical insulator, and is used for applications which require high electrical insulation. Unlike thermal grease and paste, its application is repeatable. - BGA - Audio and video - Automobile - Control unit - Electrical insulator - UL94-V0 and Rohs - Does not run - Adhesive on 1 or 2 sides - Cutting to required dimensions Thermal impedance @ 10psi (°C-In²/W) Tensile strength (N/mm²) Density (g/cm³) Standard sheet size (mm) Volume resistivity (ohm-cm) Breakdown voltage...

 Open the catalog to page 2
Thermal Interface-3

Thermally conductive insulators The TH-2300 is an electrically insulating interface with high thermal conductivity. It is aluminum oxide based, and is used for applications which require high electrical insulation. - Energy conversion - Telecommunications - High voltage unit - Electrical insulator - UL94-V0 and Rohs - Does not run - Cutting to required dimensions - Adhesive (PSA) - Fiberglass reinforcement Thermal impedance @ 10psi (°C-In²/W) Tensile strength (N/mm²) Density (g/cm³) Volume resistivity (ohm-cm) Breakdown voltage (KV) Temperature range Thickness available (mm) Standard sheet size...

 Open the catalog to page 3
Thermal Interface-4

Thermally conductive insulators The TH-2370 is a thermal interface with excellent electrical insulation properties. - Automobile - Telecommunications - High voltage unit - Electrical insulator - UL94-V0 and Rohs - Does not run - Cutting to required dimensions - Adhesive (PSA) - Fiberglass reinforcement Thermal impedance @ 10psi (°C-In²/W) Tensile strength (N/mm²) Density (g/cm³) Volume resistivity (ohm-cm) Breakdown voltage (KV) Temperature range Thickness available (mm) Standard sheet size Part number example: TH 2 37 x x xxx Standard cutting reference Option : A = With PSA (Add +0,025mm per...

 Open the catalog to page 4
Thermal Interface-5

Thermally conductive insulators The TH-2500 is an electrically insulating interface with high thermal conductivity. It is used for applications which require high electrical insulation. - Energy conversion - Telecommunications - High voltage unit - Electrical insulator - UL94-V0 and Rohs - Does not run - Cutting to required dimensions - Adhesive (PSA) - Fiberglass reinforcement Thermal impedance @ 10psi (°C-In²/W) Tensile strength (N/mm²) Density (g/cm³) Volume resistivity (ohm-cm) Breakdown voltage (KV) Temperature range Thickness available (mm) Standard sheet size Part number example: TH 2...

 Open the catalog to page 5
Thermal Interface-6

Thermally conductive insulators The TH-2800 and the TH-2900 are polyurethane thermal interfaces. They have very good puncture resistance and good electrical properties. - Aerospace - Medical - Laser - Automobile - Electrical insulator - Rohs - Without silicone - Cutting to required dimensions - Adhesive (TH-2900 only) Thermal impedance @ 10psi (°C-In²/W) Tensile strength (N/mm²) Density (g/cm³) Temperature range Volume resistivity (ohm-cm) Standard sheet size Part number example: TH 2 x0 x x xxx Standard cutting reference Option : 1 = With PSA (available for TH-2900 from 0,200mm) (Add +0,025mm...

 Open the catalog to page 6
Thermal Interface-7

Configurations Standard models Models Part number Part number Part number Part number These tests were carried out in laboratory conditions which are not representative of working conditions.

 Open the catalog to page 7
Thermal Interface-8

Configurations Models Part number Part number Part number Part number Part number Part number These tests were carried out in laboratory conditions which are not representative of working conditions.

 Open the catalog to page 8
Thermal Interface-9

Part number Part number Part number Part number These tests were carried out in laboratory conditions which are not representative of working conditions.

 Open the catalog to page 9
Thermal Interface-10

Part number Part number Part number Part number Part number Part number These tests were carried out in laboratory conditions which are not representative of working conditions.

 Open the catalog to page 10
Thermal Interface-11

Part number Part number Part number Part number Part number These tests were carried out in laboratory conditions which are not representative of working conditions.

 Open the catalog to page 11
Thermal Interface-12

These tests were carried out in laboratory conditions which are not representative of working conditions.

 Open the catalog to page 12

All STACEM catalogs and technical brochures

  1. Conductive foam
    Conductive foam

    2  Pages

  2. Fabric Over foam
    Fabric Over foam

    10  Pages

  3. O-ring
    O-ring

    32  Pages

  4. V-rings
    V-rings

    5  Pages

  5. Quad rings
    Quad rings

    13  Pages

  6. Back-up rings
    Back-up rings

    8  Pages

  7. Bonded seals
    Bonded seals

    5  Pages

  8. Aseptic-seals
    Aseptic-seals

    3  Pages

  9. Cut Seals
    Cut Seals

    3  Pages

  10. Mousse Silicone COHRlastic
    Mousse Silicone COHRlastic

    16  Pages

  11. Thermal PAD
    Thermal PAD

    27  Pages

  12. Knitted wire
    Knitted wire

    6  Pages

  13. Finger stock
    Finger stock

    12  Pages

  14. Absorber
    Absorber

    19  Pages

  15. Filled elastomers
    Filled elastomers

    26  Pages

Archived catalogs

  1. Shielding covers
    Shielding covers

    3  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.