Finger stock These tests were carried out in laboratory conditions which are not representative of working conditions.

Finger stock The finger stock is made up of a large number of fingers exercising a multitude of points of contact. It is available in various shapes and surface treatments. The mechanical and electric properties of the beryllium-copper make it an ideal material for manufacturing of these gaskets. - Shielding gasket - ESD contact - Bonding continuity - Shielded door - Broadcast and telecommunications - Front panel, plug-in module - 19" system - High conductivity - Excellent contact elasticity - Limited friction - Cutting to length - Various treatments/finishes - Adhesive (PSA) - Clips Properties...

Finger stock Profiles (in mm) Part number 23,40 1032* * Version with flat * Version at right angles Part number Part number Part number These tests were carried out in laboratory conditions which are not representative of working conditions.

Finger stock Part number Part number Part number Part number * Version with a bent end mounting surface Part number These tests were carried out in laboratory conditions which are not representative of working conditions.

Finger stock Part number Part number * version with IP gasket (Poron®) Part number * version with IP gasket (Poron®) Part number Part number * version with IP gasket (Poron®) These tests were carried out in laboratory conditions which are not representative of working conditions.

Finger stock Part number * version with lance Part number * version with lance Part number * version with lance These tests were carried out in laboratory conditions which are not representative of working

Finger stock Part number * version with lance These tests were carried out in laboratory conditions which are not represen

Finger stock Part number 11,40 4047* * version with lance 19,30 4075* * version with lance 27,90 4081* * Version with lance Part number Part number Part number Part number * Version with lance These tests were carried out in laboratory conditions which are not representative

Finger stock Part number 7,10 4089* * Version with lance 4,80 1,30 4,19 4098* * Version with lance (1) Version with inwardly folded finger 4084* 4,60 * Version with lance * Version with lance Part number Part number Part number 12,40 4111* * Version with lance Part number These tests were carried out in laboratory conditions which are not representative o

Finger stock Part number Part number Part number Part number * with an autotag delta of 1+1 ** with an autotag delta of 1+2 *** with an autotag delta of 1+5 These tests were carried out in laboratory conditions which are not representative of working

Finger stock Part number Note: not closed ring Part number Note: not closed ring Part number Note: not closed ring Part number Note: not closed ring These tests were carried out in laboratory conditions which are not representative of working conditions.

Finger stock Assembly instructions Good Free position Vertical compression Mounting method Horizontal compression Mounting method Free position Part number example: BC xxxx x A = With PSA (according to model) B = With conductive PSA (according to model) S = Without PSA 0 = Bright untreated 1 = Bright tinplate 2 = Bright nickel 3 = Bright zinc-plated 4 = Silver-plated 5 = Gold-plated A = Beryllium-Copper B = Tin-plated Copper Nickel C = Stainless steel D = Beryllium-Copper reduced thickness (according to model) Part number Finger stock These tests were carried out in laboratory conditions which...