CARPET POLES COIL BOOMS Carpet Poles Carpet poles with small diameters made of solid material are used for handling carpet rolls. Two different materials are processed here (42CrMo4 or 30CrNiMo8) in order to obtain equal load capacities with different diameters. When choosing a carpet pole, it should be kept in mind that the deflection will be greater if the carpet pole is made thinner. We recommend a carpet pole length of 3000 mm for rolls of 4000 mm length. For rolls of 5000 m length, the carpet pole should be at least 3500 mm long. As a special design, carpet poles are also available with pockets to be slipped onto forks. Coil Booms Coil booms are used for handling wire or steel coils, tubes or goods of a similar geometry. In general, coil booms are made of tube material. Depending on the load capacity, diameter and load these attachments can also be made of solid material. Conical or square shapes are also possible. There are several types of coating for the protection of the transported goods available.

Quick-CouplingHooks At a surcharge, we can also provide the lower hooks as QD hooks to enable quick mounting without the use of tools. For an occasional transportation of rolls the conversion to boom handling is too time-consuming so that it is advisable to use a slip-on version. (Slip-on type) These modules provide optimal protection for delicate round loads. They are extremely wear resistant, highly slip resistant and easy to replace. Simply slide onto the existing boom and secure with the end cap. The radius of the supporting surface is precisely adapted to the coil inner diameter; material...

- H1 applies to ISO A / H2 applies to ISO B -1 applies to ISO 3, in the case of ISO 2 170/250 - Surcharge for QD hooks for ISO 2 -2 applies to ISO 4, in the case of ISO 3 170/300 - Surcharge for QD hooks for ISO 3 - Surcharge for slip-on version (please indicate max. outer diameter) - Surcharge for QD hooks for ISO 4 - Surcharge for the next larger mounting class - Pole lengths exceeding 4000 on request. The load capacity applies to lifting heights up to 3300 mm; specifications for greater lifting heights on request. * Assumed dimensions - For greater load centers, where the lift truck has a...

Carpet Poles Material 30CrNiMo8 Model -1 applies to ISO 3, in the case of ISO 2 170/250 -2 applies to ISO 4, in the case of ISO 3 170/300 - Surcharge for slip-on version (please indicate max. outer diameter) - Surcharge for the next larger mounting class - Pole lengths exceeding 4000 on request. The load capacity applies to lifting heights up to 3300 mm; specifications for greater lifting heights on request. * Assumed dimensions - For greater load centers, where the lift truck has a higher residual load capacity than the attachment, those values, upon the exceedance of which the attachment would...

- H1 applies to ISO A / H2 applies to ISO B - Surcharge for integral design, see page 209 - Surcharge for QD hooks for ISO 2 - Surcharge for slip-on version on request. - Surcharge for QD hooks for ISO 3 - Surcharge for protective modules on request. - Higher load capacities on request. The load capacity applies to lifting heights up to 3300 mm; specifications for greater lifting heights on request. * Assumed dimensions

Special Products Four-boom hydraulic positioner Single booms for fork positioners Coil booms with Terminal-West mounting Hydraulically telescopable boom Slip-on carpet pole Square boom with separate sideshift