FALL PROTECTION YOU'RE SAFE UP HERE WITH US

Welcome to the world of LUX-top® Fall Protection.

Anchor points Safety roof hooks Guard rail / Side protection Lifeline systems Rail systems Height access systems Rope access techniques Ladder protection

FALL PROTECTION

FALL PROTECTION ST QUADRAT Fall Protection S.A.: Your competent partner for fall protection The safety and engineering consultant ST QUADRAT S.A. was founded in 1994 with the objective of developing, producing and selling simple, flexible and easily installable temporary fall protection devices for steep and flat roofs. Since the company was founded the range of products has been added to steadily. Many new developments are protected by patent, utility model or registered design. Customer needs are readily taken up and, if possible, implemented quickly. For example, in 1998 the engineers began...

FALL PROTECTION

LUX-top® on and in Europe‘s buildings LUX-top®: The innovative and patented fall protection systems made by ST QUADRAT. For more than 20 years we have been developing unique and quality solutions, which set standards when it comes to personal safety and service – for all work in areas where there is a risk of falling – on roofs or on façades of buildings. We now sell our products in 17 European countries and therefore ensure personal safety in all kinds of different projects. Here is a small selection: Rhein-Neckar-Arena, Sinsheim ADAC Head Office, Munich Stade Jean Bouin, Paris University of...

Our actions: Integrated. Professional. Personal. We know your trade: not least because we ourselves are a skilled crafts firm. As a successful and family-run business, we have our „ear to the ground“ where our customers are concerned and consider ourselves to be problem solvers with an integrated approach. As a reliable partner, who discusses problems with you on an equal footing, who accepts (individual) requirements and offers professional solutions. We work daily, full of passion and commitment to become even better and we place great importance in personal support expertise innovative strength...

Sales · Planning & Design · Training > Sales with competent advice > Assistance with the planning & design and installation of our systems on site > Practically orientated training for dealers, installers and designers For several years we have increasingly focussed on close collaboration with engineers and architects. Our team offers this important group of decision-­ makers professional advice and assistance with the planning & design of all kinds of different fall protection systems. In recent years we have managed to develop a continuously expanded core expertise, especially in the area of...

Explanation of the product names Information I LUX-top® anchor devices have been designed to ensure a safe and secure anchor point for attaching personal fall protection equipment (PFPE) during work in areas where there is a risk of falling from a height. l I n addition to EN 795, all our products are statically and dynamically type-tested with all the relevant fixing materials on the respective surfaces. I LUX-top® anchor points are made of stainless steel. Overall heights of the anchor points up to 100 cm possible. For further information please refer to the relevant installation and use instructions!...

IMPORTANT INFORMATION Basic information on fall protection for working on roofs Maintenance work on roofs is among the most dangerous work in the construction industry. Such deployments are often required under adverse conditions. For example, in 2013 falls from a height accounted for 51 % of all fatal work accidents in the German construction industry. The causes of this type of accident are frequently lack of or inadequate fall protection devices. According to the relevant regulations, if work is carried out on roofs equipment is required to prevent people from falling! Ultimately the operator...

l Adequate minimum working height for the arrest must be available I Swinging falls must be avoided Impact of the person whose fall is arrested must be prevented l Equipment must be suitable for the load or forces acting at the fall edge I I mmediate rescue of a person whose fall is arrested must be ensured The most frequently used types of anchor devices are single anchor points to EN 795 Type A and horizontal anchor devices (e.g. stainless steel rope systems (lifeline systems)) to EN 795 Type C. Lifeline systems provide far better protection, as the user of the system can move parallel along...

Anchor points

LUX-top® Anchor points The tried and tested anchor points for different substrates. For attaching personal fall protection equipment.

LUX-top® ASP EV 2 ANCHOR POINTS Anchor point for attaching to concrete ceilings / concrete components at least C20/25 Tested and certified to EN 795:2012 type A + CEN/TS16415:2013 by the certification body DEKRA EXAM GmbH. Can be used as single anchor point or in LUX-top® FSE 2003 lifeline systems to EN 795:2012 type C. Anchor points TECHNICAL DATA Max. number of users: 3 persons Material: W1.4301 / AISI 304 Type examination certificate: Nr. ZP/B097/14 Base plate dimensions: 150 x 150 x 6 mm or 80 x 150 x 6 mm Rod diameter: 18 or 26 mm INSTALLATION DISTANCES According to national regulations...

ANCHOR POINTS Anchor point for attaching to/onto steel constructions Anchor points Tested and certified to EN 795:2012 type A + CEN/TS16415:2013 by the certification body DEKRA EXAM GmbH. Can be used as single anchor point or in LUX-top® FSE 2003 lifeline systems to EN 795:2012 type C. TECHNICAL DATA INSTALLATION DISTANCES Max. number of users: 3 persons Material: W1.4301 / AISI 304 Type examination certificate: Nr. ZP/B097/14 Base plate dimensions: 150 x 150 x 6 mm or 80 x 150 x 6 mm Rod diameter: 18 or 26 mm Minimum component dimensions: t = 4.0 mm According to national regulations and depending...

ANCHOR POINTS Anchor point for attaching to bare concrete components at least C20/25 Anchor points Tested and certified to EN 795:2012 type A + CEN/TS16415:2013 by the certification body DEKRA EXAM GmbH. Can be used as single anchor point or in LUX-top® FSE 2003 lifeline systems to EN 795:2012 type C. TECHNICAL DATA ATTACHMENT MATERIAL Max. number of users: 3 persons Material: W1.4301 / AISI 304 Type examination certificate: Nr. ZP/B097/14 Base plate dimensions: 150 x 150 x 6 mm Rod diameter: 16 mm Minimum component dimensions: 80 mm > 4 pcs. concrete anchor bolts M10 A4 INSTALLATION DISTANCES...