ULC-T Line Card The universal transmit line card, ULC-T, features DVB-S2 up to 54MHz or DVB-S2X up to 125MHz carrier bandwidth with Adaptive Coding and Modulation (ACM) on the outbound channel. In conjunction with a multi-channel demodulator line card (e.g. ULC-R), the ULC-T is ideally suited for broadband applications such as Internet and VPN access to enterprise networks, along with real-time VoIP and videoconferencing on both the ST Engineering iDirect Evolution and Velocity platforms. The ULC-T line card can also be configured alternatively to support a proprietary BPSK spread spectrum waveform to enable low data rate communication in conjunction with the iDirect portfolio of Fixed/Dynamic IoT Terminals available in either Ku-Band/Ka-Band variants. Network Configuration Network Technology DVB-S2 , DVB-S2X, IoT** Modem One Modulator (Transmit one downstream carrier) IoT**: BPSK, 35% Roll-off factor Symbol Rate DVB-S2: 1 to 45 Msps DVB-S2X: 5 to 119 Msps*, with max 125 MHz occupied bandwidth IoT**: Chip Rates: 110Kcps - 3125Kcps Spread Factors: 5 to 64 Compatible with Series 15100 Universal Hub (5IF/20 Slot) DVB-S2 requires Evolution 3.4 / Velocity 1.1 software or above DVB-S2X requires Evolution 4.1 or above IoT** mode requires IoT software configuration on ULC-T TxIF: Type-F, 950-2000 MHz, +5/-35 dBm power GigE LAN A: Data & Control; GigE LAN B: Data & Control. Link Aggregation. Locked to customer supplied PPS/10 MHz through backplane Linear pre-distortion Redundancy Software controlled, hot-swappable, and All specifications are software dependent. * Specifications are modem dependent. ST Engineering iDirect | www.idirect.net