5-color printing system for printing on cylindrical objects Model ZDM-5 This machine concept was developed for the printing of drink bottles, cans, cartridges, etc. The uses of servo motors for the drive of the print units are a guaranty of a high degree of accuracy for the operators, plus ease of conversion for other jobs. Programs for the various print parameters are stored on the machine memory and can be called up immediately as required. This means that the conversion will happen automatically. The feeding system is done by an electro mechanical rotary indexing table. All work stations, such as print units, feed as well as off-load robots and curing stations are grouped around the indexing table. By the use of a rotary table, instead to opt for other feeding systems, less jigs are needed. The printing objects are loaded into the jigs in the loading station, registered and then held until the offloading station is being reached. By the use of this system a high print registration will be guaranteed. The whole machine control happens with a free programmable PLC from Omron. Technical datas *) Printing machines: Screen printing machines driven by servo motors Transport: drying: Capacity per hour: Dimenssions: Electrical: Air pressure: electro-mechanical rotary table UV-Curing up to 2300 parts, depends to the diameter Appr.. 2500x2500 mm 3x400V / 20A / 50/60Hz 5-6 bar *) We reserve the right to make technical changes without prior notice ______________________________________________________________________________________ ST Drucksysteme, Blattenweg 1, CH-8235 Lohn / Switzerland Tel: +41 (0)52 670 14 34, Fax: +41 (0)52 670 14 36 eMail: [email protected] / www.stds.ch / www.stsprint.com