Screen printing machine for printing on wooden laths This automatic printing system was developed for printing up to 5 meter long wooden laths. This system is made for the building industry. The printing includes names, logos and/or a reflecting strip. The wooden laths are loaded manually into a loading magazine. Three pneumatic cylinders push the laths onto a conveyor. The conveyor transports the wooden laths to the printing station. By an electronically measuring system the laths are poisoned in the printing station. In the printing station the laths are printed by one screen printer SP-400. The laths are printed every 1 meter with a print of max. 450 mm. After printing the laths pass a UV-drying oven. In the off-loading station the laths are pushed onto a stacking area. Technical Data *) Printing machine: Transport: Drying: Electrical: Air pressure: Screen printing machine SP-400 with conveyor UV-Curing 3x400V / 16 A 5-6 bar *) We reserve the right to make technical changes without prior notice ______________________________________________________________________________________ ST Drucksysteme, Blattenweg 1, CH-8235 Lohn / Switzerland Tel: +41 (0)52 670 14 34, Fax: +41 (0)52 670 14 36 eMail: [email protected] / www.stds.ch / www.stsprint.com