Pad printing system for printing on closures in 1-2 colors This pad printing system is for printing on closures in 1- to 2-colors. The closures are loaded manually into the jigs. By an electro-mechanical rotary table the closures are transported to the first pad printing machine SL-100. In this station the first color is printed. After printing, the closure passes an intermediate drying. After that the closure moves o the second pad printing machine SL-100, where the second color gets printed. The last working station is the final drying and the rotary table moves the closures back to the loading station. To optimize the change over time and to set up the printing plate, the pad printing machines are equipped with a X-,Y- and Z-axes table. Technical data *) Pad printing machine: Transport: Drying: Electrical supply: Pad printing machine SL-100 with a sealed inkpot Elctro-mechanical rotary table Hot air blower with adjustable temperature 230V / 16 Amps / 50/60Hz *) We reserve the right to make technical changes without prior notice ______________________________________________________________________________________ ST Drucksysteme, Blattenweg 1, CH-8235 Lohn / Switzerland Tel: +41 (0)52 670 14 34, Fax: +41 (0)52 670 14 36 eMail: [email protected] / www.stds.ch / www.stsprint.com