IGW/963 CAN2IP Gateway High-speed CAN Interface OpenVPN Client and Server Firewall with NAT Support CAN to Internet Support Free Programmable 12 – 24 VDC Power Supply DIN-rail Mounting The very compact CAN-to-Ethernet Gateway IGW/963 transfers CAN data over TCP/IP or UDP/IP. It can be operated in two modes. The bridge mode connects two CAN busses at different locations through an IP network. The gateway mode allows to access a CAN bus with an external system via an IP network. The IP network can be established over an Ethernet crossover cable, a LAN infrastructure or an internet-based SSL/TLSsecured VPN (Virtual Private Network). The peer-to-peer VPN connection works without an additional VPN server. The DynDNS support facilitates the remote access configuration. To ensure a high level of safety and security the IGW/963 comes with an integrated firewall and NAT support, to protect the system against unauthorized network access. The high-speed CAN interface (ISO 11898-2) is galvanically isolated and supports Baud rates from 50 kbps up to 1 Mbps. There are also two RS232 serial ports for further communication. The IGW/963 has a 32-bit ARM9 MCU @192 MHz, which leads to a low power consumption of only 1.2 W. Basic hardware interfaces of the IGW/963 High Flexibility To operate the IGW/963 in gateway mode, the delivery contains a sample Python script for external systems. It creates a virtual connection analogous to the bridge mode of two IGW/963. The script prepares the received CAN data for further processing and allows the conversion to other protocols such as IEC 60870-5, for instance to integrate a CAN bus in a telecontrol application. The script also supports the forwarding of CAN data to almost any other applications like IoT-/cloud platforms, databases, SCADA or MES/ERP systems. Configuration of the IGW/963 as CAN bridge or gateway Specifications subject to change without notice. No guarantee for the accuracy of the statements. Some names within this document can be trademarks of their respective holders. © 2015 SSV Software Systems GmbH. All rights reserved. Rev. A, 08/2015, wbu

Specifications Processor • 1x 24 VDC Plug-in power supply • 2x Adapter cable with RS232 connector • 1x Null modem cable Customized variants with preinstalled configuration and/or individual case design on request. • Embedded module DIL/NetPC DNP/9265 Please don’t hesitate to contact us for more information about our products and services. SSV Software Systems GmbH Dunenweg 5 D-30419 Hannover Specifications subject to change without notice. No guarantee for the accuracy of the statements. Some names within this document can be trademarks of their respective holders. © 2015 SSV Software Systems...