WS MICROWELDING - HIGH SPEED SPOT WELDING - CONSUMABLES ELECTRODES – POWDERS & PASTES - RIBBONS

Silver welding electrodes Massive electrodes in alloy of industrial silver in 50 % and tungsten in 50 %. In the form of cylindrical bars gone up or not in a cap brass, depending of the diameters. They are used for welding wires, ribbons and powders. Can be machined and formed. They are intended for the small welding torch 0 16 mm2 with electrode holder 0 5 mm and welding torches 0 35 mm2 maximum. Only references EL-AG-230 & EL-AG-250 are used with the electrode holder 0 2 mm.

Magnetic electrodes Machined cylindrical electrodes, in Cu Cr, exclusively intended for the welding of the powder. Cannot be machined and formed. References 2535 and 540 can be only used with 352 welding torch. Reference 860 is exclusively intended for welding torches 0 70 mm2.

H13 POWDER AND PASTE Suitable for material : 1.2343 / 1.2344 / 1.2362 / 1.2363 / 1.2365 / 1.2367 Hardness after welding: 50 - 52 HRC

P20 ribbon Suitable for material : 1.2311 / 1.2312 / 1.2710 / 1.2162 / 1.2738 Hardness after welding : 34 HRC

Suitable for material : 1.2083 / 1.2316 / 1.4115 / 1.4120 Hardness after welding : 54 HRC 316L RIBBON Suitable for material : 1.234 / 1.2312 / 1.2738 Hardness after welding : 30 HRC

A2 RIBBON Suitable for material : 1.2080 / 1.2363 / 1.2379 / 1.2436 /1.2601 Hardness after welding : 62 HRC Information For technical advice or a quotation, please contact us on 0033 (0)5 56 29 5J 60 or by email: [email protected]. Document valid from J January until 3J December2024. SSTFRANCE Rue du professeur Dangeard Zone MasterClub 33300 BORDEAUX - FRANCE Office : +33 (0)5 56 29 51 60 Fax : +33 (0)5 56 29 51 69 Mail : [email protected] www.sstmicrowelding.com