PALLET RACKING SYSTEMS 2022 Extract from general catalog

SSI SCHAEFER's pallet racking systems are so handy as the Euro and Industrial pallets themselves. It doesn't matter what kind of load carrier - pallets, mesh boxes or any other - longitudinal beam racks for single- or multiple place storage ensure high mobility of ware and quick goods turnover. Multi-place longitudinal beam rack systems are used in diverse branches from wholesale or spare parts warehouses in the electronics, mechanics and automotive industries. Single-place rack systems are ideal for storing goods with the same base carrier and varying heights. Drive-in rack systems have proven...

Pallet racking systems PR 600 longitudinal beam racking Accessories for pallet racking Safety accessories Storage and storage space labeling Customer Service & Support On-line shelving/ KDR shelving Cantilever racking I Pallet racking Longspan racking Modular shelving

Pallet racking systems Overview of pallet racking system Longitudinal beam rackings PR 600 Pallet storage of medium and high-volume goods with medium to high loads, e.g. for I ogistics services ► Sturdy due to special design ► Highest dimensional accuracy Beam connection System hole pattern Upright profile widths Frame load capacity Beam load capacity Frame surface Beam surface ► Bolted frame construction with longitudinal beams, 4 stand profiles each with 3 frame depths, 10 frame heights, 2 beam types, 7 bay width from page

Modular shelving Pallet racking systems Safety equipment for racks according to German regulation DG-UV 108-007 1.1 Row end frame height increase by at least 500 mm above the top rack height Longspan racking 1.2 Passage overhead protection These must be covered by chipboard, grating or similar. Clear passage height must be at least minimum 2,000 mm 1.3 Safety distance between load carriers Safety distance between load carriers lower than 100 mm? Back stops will be necessary inside double-sided racks 1.4 End Frames Corner protectors must be installed at all free-standing end frames. This also...

Pallet racking systems PR 600 – the modern pallet racking system The PR 600 rack system is characterized by its diverse, versatile configuration options. This enables the implementation of all designs including longitudinal beams, front-to-back beams and drive-in racking systems for maximum storage capacity with a minimum volume. One advantage that frequently does not come into play until later is the ability to adapt the system to changing circumstances. The rack frames are bolted together and also designed for the highest loads. This is a modern pallet racking system – a versatile stacking...

Longitudinal beams Longitudinal beam racking PR 600 High load capacity Frame load capacity of up to 30,000 (for min. 2 beam pairs INP 100 per rack bay and 5 rack bays per rack row), beam load capacity up to 4,500 kg per pair with adjustment spacing 50 : 50 mm with only a few components Frames andlongitudinal beams PR 600 Front-to-back supports Mesh back panels Front-to-back support from the angled profile Fork spacers Load sign Steel panels on INP beam profile Corner protector Mesh panels on beam profile INP Fork spacer Front-to-back supports made of angled profile with locking bracket Steel...

Frame load capacity The permissible frame load (or bay load) depends on the compartment height and the selected beam profile. The specified values apply for racks with at least 2 pairs of longitudinal beams/rack bay, rows with at least 5 rack bays and CE 110 for bays width 2,700 mm along with CE 140 for bay with 3,600 mm). The values vary depending on the beam profile. The load chart is based on DIN EN 15512:2020. Compartment heights exceeding 2,500 mm require a separate static calculation. I f you have any questions please contact our technical consultants.

Longitudinal beam racking PR 600 Made of cold rolled, high-strength steel. Their special shape makes the supports highly rigid. These are bolted together with horizontal and diagonal braces to create a sturdy frame. Delivered unassembled. System hole pattern 50 : 50 mm steps. Solid floor plates safely transfer the loads to the floor. with welded 5-hook rear lips. These guarantee an interlocking connection with the rack supports. Adjustable using the system hole pattern 50 : 50 mm. 2 retaining pins (included in the scope of delivery) per section are required to prevent unintentional removal. The...

Accessories Fixing angle for front-to-back supports Fitting options for front-to-back supports, either designed for euro pallets, industrial pallets or DIN-box mesh box pallets. Item Clear bay width Order no. Spacers Two single-row racks can be positioned one behind the other and then connected with spacers to form double-row racks. The length of the spacers is calculated from the difference between the rack depth and loading aids/loading unit plus 100 mm. Front-to-back support made of angled profile for pallet and container storage For the fitting loading aids in pallet racking systems. Loading...

J _ ... _ Mesh panels Sheet steel panels Placed on longitudinal beams and locked in place. Mesh size 33 x 33 mm. Two-piece for clear bay width 2,200 mm. The load specifications apply for evenly distributed loads. The variants listed are not suitable for point loads. Other versions available on request. Supported mesh panels for INP and CE beam profiles Sheet steel panels C-shaped bevel. Locking in depth direction through short-side overlap of the beams. Individual or multiple covers can be used. The load specifications apply for evenly distributed loads. Clear bay width (mm) Panel width (mm)...

Pallet racking systems Placed on the profile of the INP or CE longitudinal beams. Secured against moving with fixing brackets. Two-piece for clear bay widths exceeding 3,300 mm. The load specifications apply for evenly distributed loads. The variants listed are not suitable for point loads. Other versions available on request. Surface: untreated. For 38 mm chipboard and INP/CE longitudinal beams, incl. spacers. Insulation plates made of plastic are needed for each rack support in order to prevent corrosion on floors containing magnesium.