Pedal Pumps
5Pages

{{requestButtons}}

Catalog excerpts

Pedal Pumps - 1

► PRODUCT DATA SHEET FPC-250 Pedal pump-cylinder unit- with pulling cylinder The FPC-250 combines a pedal operated pump with a pulling cylinder and an oil reservoir into a single stainless steel unit. Application FPC-250 is designed to be used for height adjustment of working platforms as an all-in-one hydraulic system. Features 0 Throttled retraction to prevent sudden drop of load 0 Spring centered pedal 0 Joint-like fixtures 0 Cleaning friendly 0 Sealed according to IP68 0 Maintenance free 0 Easy to install 0 Customized pedal designs possible Specifications Stroke (standard) Installation The lower joint-like fixture is attached to the platform floor and can compensate for a certain amount of platform misalignment. The piston rod is hinged on a fork-fixture on the platform frame. Hydraulics The FPC-250 is factory filled with hydraulic fluid (fulfilling NFS-H1 requirements) and virtually maintenance free. The pump/cylinder piston area ration is 1:5, so a force of 1 kN applied to the pedal equals a cylinder pulling force of 5 kN. Sfaifiless ca-s Kuopiovej 18 • 5700 Svendborg • Denmark Tel: +45 6221 8531 • Fax: +45 6221 7840 Email: ssh@ssh-stainless.dk • www.ssh-stainless.dk

Open the catalog to page 1
Pedal Pumps - 2

Oil type: Castrol Optileb HY 32 (NSF-H1 approved) Glycol type: Zitrec FC (FDA / NSF approved) SSH Stainless a.s * DK-5700 Svendborg * Tel. +45 6221 8531 * Mail ssh@ssh-stainless.dk * www.ssh-stainless.dk 9.21 R2 Ordering code

Open the catalog to page 2
Pedal Pumps - 3

PRODUCT DATA SHEET FPCP-235 Pedal pump-cylinder unit- with pushing cylinder The FPCP-235 combines a pedal operated pump with a pushing cylinder and an oil reservoir into a single stainless steel unit. Application FPCP-235 is designed to be used for height adjustment or tilt jack on containers, trolleys etc. as an all-in-one hydraulic system. Features 0 Throttled retraction to prevent sudden drop of load 0 Spring centered pedal 0 Cleaning friendly 0 Sealed according to IP68 0 Maintenance free 0 Easy to install 0 Customized pedal designs possible Installation The lower base flange is attached...

Open the catalog to page 3
Pedal Pumps - 4

PRODUCT DATA SHEET The FP-4.0-T is a compact, pedal operated hydraulic pump with integrated fluid reservoir. Application FP-4.0-T is designed to drive a single hydraulic cylinder, typically for height adjustment of working platforms, tables, beds or stretchers. Features 0 Pump and release function combined in pedal 0 Throttled release flow to prevent sudden drop of load 0 Spring centered pedal 0 Maintenance free 0 Easy to install 0 Available with pedal fitted on left (V) or right (H) hand side. 0 Customized pedal designs possible 0 Available as FT 3.0-T with 3 cc/stroke...

Open the catalog to page 4
Pedal Pumps - 5

PRODUCT DATA SHEET FP-3.5 Pedal pumpOperates two hydraulic cylinders in parallel The FP-3.5 is a compact, pedal operated hydraulic pump with integrated non-return valves. The valves ensure stability by uneven loads on two-cylinder applications. Application FP-3.5 is designed to drive one or two hydraulic cylinders, typically tor height adjustment of working platforms or tables. Features 0 Pump and release function combined in pedal Throttled release flow to prevent sudden drop of load Spring centered pedal Non-return valves in outlet ports Maintenance free Easy to install Available with...

Open the catalog to page 5

All SSH Stainless catalogs and technical brochures

  1. Hand Pumps

    10 Pages

Archived catalogs