PRODUCT DATA SHEET FPCP-235 Pedal pump-cylinder unit - with pushing cylinder The FPCP-235 combines a pedal operated pump with a pushing cylinder and an oil reservoir into a single stainless steel unit. Application FPCP-235 is designed to be used for height adjustment or tilt jack on containers, trolleys etc. as an all-in-one hydraulic system. Features þ retraction to prevent Throttled sudden drop of load þ Spring centered pedal þ friendly Cleaning þ Sealed according to IP68 þ Maintenance free þinstall Easy to þ Customized pedal designs possible Specifications Stroke (standard) Pump/piston ratio Installation The lower base flange is attached to the container frame by means of four bolts. The piston rod can be fitted on to the frame with a customer specific end bracket. The pump/cylinder piston area ratio is 1:4, so a force of 1 kN applied to the pedal equals a cylinder pushing force of 4 kN. Release position Pump function The FPCP-235 is factory filled with hydraulic fluid (fulfilling NFS-H1 requirements) and virtually maintenance free. Stainless a .s Englandsvej 20-22 • 5700 Svendborg • Denmark Tel: +45 6221 8531 • Fax: +45 6221 7840 Email: [email protected] • www.ssh-stainless.dk s nles Stai l Stee ulics ra Hy