PRODUCT DATASHEET Hand tool kit for the installation of connectors and grounding kits on CELLFLEX® Cables The hand tool kit for CELLFLEX® cables contains all devices required for the installation of OMNI FIT™ connectors onto CELLFLEX® cables from SCF14 up to LCF158 using the manual way as described in the installation instruction. By seperately acquiring of the required trimming tools, this kit also supports the automated process. FEATURES / BENEFITS All tools for manual installation of connectors and grounding kits in one box. For easier installation and in order to get the highest possible quality of installation we recommend going for our Universal Trimming Tools (TRIM-SET*-****-***) in addition. For easier and safe installation of grounding kits and for the dismantling of cable jacket for the connector installations we recommend using our jacket stripping tools (JSTRIP-***-*) in addition. Technical features STRUCTURE Product Line Coaxial Cable Accessories Product Type Transmission Line Type Coaxial Cable Type Foam Dielectric Cable Size Please see other documentation below. MECHANICAL SPECIFICATIONS Length PACKAGING INFORMATION Package Quantity Weight per piece External Document Links Notes Component: 1 tool box 1 knife (carving) 1 tinner's shears 1 combination plier 1 flat brush 1 flat file (smooth cut) 1 hack saw 10 hack saw blades (smooth fine teeth) 1 pocket saw 12 saw blades for pocket saw (smooth fine teeth) 1 screw-driver 4.5 x 125 mm 2 poly hook spanner 60-90 mm 1 steel measuring tape 300 mm always 1 hexagon socket key 2 mm; 2.5 mm; 3 mm; 5 mm always 1 open end wrench SW 10x11; SW 13x14;SW 14x15;SW 16x17;SW21x22; SW 30x32; SW30x36; SW32x36 always 2 open end wrench SW18x19; SW20x22; SW24x27 All values nominal unless tolerances provided; information contained in the present datasheet is subject to confirmation at time of ordering