1. Catalogs
  2. SRA
  3. SCENTROID SF450

SCENTROID SF450

SCENTROID SF450

SCENTROID SF450

Product catalog summary
Overview: The Scentroid SF450 Flux Chamber is a device designed for measuring emissions from both solid and liquid surfaces. It is constructed entirely from stainless steel to prevent cross-contamination and is equipped with stainless steel floats for liquid surface sampling.
Features:
  • 100% stainless steel construction for durability and easy maintenance.
  • Stainless steel floats eliminate the need for foam or rubber tubes.
  • Equipped with fittings for sweep air, sample air, relief flow, and temperature probes.
  • 450 mm diameter with an enclosed surface area of 0.155 sq meters (240 sq inches).
  • Recommended sweep air flow rate of 6 LPM.
  • Standard fittings for 1/4” or 12 mm OD PTFE tubing, with custom sizes available.
Operation: The flux chamber encloses a surface area of 240 sq inches, following EPA recommendations. Odourless air or nitrogen is introduced at a known flow rate to mix with emissions, and samples are drawn using a sampling device like the SB10 Vacuum Sample Box.
Basic Operation Steps:
  1. Connect the sweep air line to a nitrogen or zero air cylinder.
  2. Move the Flux Chamber to the sampling location.
  3. Allow for two air exchanges inside the chamber.
  4. Pull the sample with a vacuum chamber.
  5. Sweep air may not be required for aerated liquid sources.
Applications:
  • Emission measurement from liquid surfaces such as settling tanks and off-spec ponds.
  • Emission measurement from solid surfaces like compost piles and sludge.
  • Suitable for liquid active sources such as aerated lagoons.
  • Ideal for sampling corrosive sources with high benzene or H2S content.
  • Designed for field operations requiring quick decontamination.
See more

Catalog excerpts

SCENTROID SF450-1

SCENTROID SF450 FLUX CHAMBER (AKA to determine levels of emissions from solid or liquid The Scentroid flux chambera 100%Emission Isolation Flux Hood) is usedensure zero cross contamination. Flotation is achieved surfaces. The SF450 has solid stainless steel construction to using 4 stainless steel floats eliminating the need for rubber tubes or foam making the unit easy to clean and maintain. FEATURES The flux chamber is set up to enclose a surface area of 240 Sq Inches or 0.155 sq meters in accordance to the EPA Recommendations. Odourless air or nitrogen (sweep air) is introduced to the chamber at a known flow rate (Recommended 6 LPM) to mix with the emissions. Sample is then drawn from the flux chamber at lower rate using a sampling device such the SB10 Vacuum Sample box. -Designed for both solid and liquid surface sample collection. 100% stainless steel construction. -Stainless steel floats (no foam or rubber tubes needed for liquid surface sampling). -Stainless steel fitting for sweep air (clean air), sample air, Relief flow, and temperature probe . -Extra fitting for thermocouple probe (sold separably). -Stainless steel chain and hoist ring. -450 mm (17”) diameter with enclosed surface area of 0.155 sq meters (240 sq inches). -Recommended sweep air of 6 LPM. -Standard fittings designed for 1/4” or 12 mm OD PTFE tubing for sweep and sample air (custom size fitting available). SCENTROID 431 Alden Road. #3 Markham, ON, L3R 3L4 CONTACT US Local: +1.416.479.0078 Toll-Free 1.888.988.IDES (4337) WEB AND EMAIL Email: [email protected] www.scentroid.com RECYCLED PAPER

 Open the catalog to page 1
SCENTROID SF450-2

Flux Chamber designed for both solid and liquid surface sample collections. Flux Chamber Applications - Emission Measurement from Liquid surfaces such as settling tanks and off-spec ponds. - Emission Measurement from Solid surfaces such as compost piles and sludge - Emission Measurement from liquid active sources such as aerated lagoons - Ideal for sampling of corrosive sources e.g. with high benzene or H2S content - Ideal for field operations that require quick decontamination Flux Chamber Basic of Operation SCENTROID 431 Alden Road. #3 Markham, ON, L3R 3L4 CONTACT US Local: +1.416.479.0078...

 Open the catalog to page 2
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.