DILUTING SAMPLER easy to use temperature nitrogen zeroStacktosampler is ancondensationdevice that provides accurate pre-dilution of highinside the 35 gas emissions withprobe andorcan be air minimize inside the sample bag. Dilution is achieved mm flue heated controlled from 1:1 to 1:305 in 14 steps. CAPABILITIES If hot gasses emitted from a stack are directly placed in a PTFE, Tedlar or Nalophan bag they begin to develop condensation. These small droplets of water absorb many of the critical components that contribute to the overall composition and odour of the sample. The stack diluting sampler eliminates this problem by mixing the stack air with dry clean nitrogen so that the moisture can’t condense inside the bag. The mixing happens inside the probe and since the probe becomes the same temperature as the stack air, there is no chance of the sample developing condensation before being mixed with nitrogen. Attach the sample bag. Open the valve on the nitrogen micro-tank. Select the desired dilution from 1:3 to 1:305. Adjust the flow rate if time sampling is desired. Insert the probe into stack and allow a minute for it to reach the same temperature as the stack gases. Press the trigger and wait for the sample bag to fill up. SCENTROID 431 Alden Road. #3 Markham, ON, L3R 3L4 CONTACT US Local: +1.416.479.0078 Toll-Free 1.888.988.IDES (4337) WEB AND EMAIL Email: [email protected] www.scentroid.com RECYCLED PAPER

DILUTING SAMPLER Stack Diluting Sampler Features - Flue gas heated probe - Completely stainless steel wetted surfaces - Includes nitrogen micro-tank with filter and regulator - One push sampling operation - Grab and time sampling from 0-17 LPM - Lightweight and easy to carry up stacks - High temperature compatibility of 400C with optional 600C SCENTROID 431 Alden Road. #3 Markham, ON, L3R 3L4 CONTACT US Local: +1.416.479.0078 Toll-Free 1.888.988.IDES (4337) WEB AND EMAIL Email: [email protected] www.scentroid.com RECYCLED PAPER With a backpack containing micro-nitrogen tank and simple one push...