OW Dual Filters - A130

OW Dual Filters - A130

OW Dual Filters - A130

Product catalog summary
Overview: The Dual Filter OW is designed for continuous liquid filtration with minimal pressure loss. It features a cast construction with two chambers, each containing a stainless steel basket. Flow is diverted between baskets without interruption, ensuring continuous operation.
Main Features:
  • Simple changeover operation with infrequent maintenance.
  • Compact design with large filtration areas for low-pressure drops.
  • Handles working pressures up to 50 bar (A300 Series).
  • Quick release filter covers and knobs for easy maintenance.
  • No contamination between filtered and unfiltered liquids.
  • Available in a wide range of materials, sizes, and accessories.
  • Filtration capability down to 10 microns.
  • Optional differential pressure indicators.
Specifications:
  • Available in sizes from 20 mm (¾”) to 200 mm (8”).
  • Materials include cast iron, cast steel, gunmetal (bronze), and stainless steel.
  • Maximum working pressure varies by material, up to 50 bar at 50°C.
  • Maximum working temperature up to 260°C, dependent on seal selection.
Materials and Standards:
  • Cast Iron: EN1561/EN-JL 1030, ASTM A48/76 Class 35.
  • Cast Steel: EN10213-2/1.0625, ASTM A216 Grade WCB.
  • Gunmetal (Bronze): BS 1400 Grade LG4C.
  • Stainless Steel: BS 1504 Grade 316 C16, ASTM A351 CF8M.
Additional Information: The document includes a sizing chart for pressure drop versus flow rate, indicating performance across various pipe sizes. The company reserves the right to make design and material changes without notice.
See more

Catalog excerpts

OW Dual Filters - A130-2

For applications where the requirement is for continuous flow with minimum loss of pressure, the dual filter OW provides quality of design and performance. The filter is of cast construction and incorporates two chambers each containing a high quality stainless steel basket. Flow is diverted from one basket to the other without interruption by turning the handle, which rotates dual cylindrical cocks, delivering the flow to the appropriate chamber. M a i n F e at u r e s • Simple changeover operation requires infrequent maintenance. • Wide range of materials, sizes and accessories. • Compact design....

 Open the catalog to page 2
OW Dual Filters - A130-3

*) Gunmetal (bronze) DN 20, 25 & 40 filters are rated at 13.8 bar at 50°C Please Note 1 These specifications refer to standard products. Other materials for body (e.g, monel, hastelloy) and seals (e.g. Nitrile, EP, PTFE) are available, please ask. 2 Working pressure is stated at 50°C. To verify suitability of this equipment above this temperature or below 0°C, please contact us for more information. 3 Whilst alternative seal materials e.g. Nitrile, EP, PTFE are available and can be used to offer a wide range of chemical compatibility and working temperatures up to 260°C, it is recommended that...

 Open the catalog to page 3
OW Dual Filters - A130-4

Flow Rate Water L/min Hambridge Road Newbury, Berkshire, RG14 5TR, UNITED KINGDOM T: +44 (0) 1635 263915 F: +44 (0) 1635 36006 E: [email protected] SPX reserves the right to incorporate our latest design and material changes without notice or obligation. Design features, materials of construction and dimensional data, as described in this bulletin, are provided for your information only and should not be relied upon unless confirmed in writing. Please contact your local sales representative for product availability in your region. For more information visit www.spx.com and www.airpelfilters.com....

 Open the catalog to page 4
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.