The Single Filter Multibasket extends the range of Single Filters, specially designed to be compact and easily maintained, with basket removal easier compared to other units with similar pipe size connections. The filter is of cast construction and is supplied with four or five high quality stainless steel cylindrical baskets depending upon the size. For use in liquid handling installations where flow can be interrupted to allow the removal of baskets for cleaning. M a i n F e at u r e s • High quality stainless steel baskets with large filtration areas resulting in low pressure drops • Range of extras allowing filter to be customised. • Compact design for space saving. • Available in cast iron, cast steel, gunmetal (bronze or stainless steel as standard. • Differential pressure indicators are available. • Quick release filter covers and knobs for easy basket removal. S p e c i f i cat i o n s OV M u lt i ba s k e t B o dy & c o v e r m at e r i a l Viton is a registered trademark of DuPont Performance Elastomers. Please note 1 These specifications refer to standard products only. Other materials for bodies (e.g. monel, hastelloy) and seals (e.g. Nitrile, EP, PTFE) are available on request. 2 Working pressure is stated at 50°C. To verify suitability of this equipment above this temperature or below 0°C, please contact us for more information. 3 Whilst alternative seal materials e.g. Nitrile, EP, PTFE are available and can be used to offer a wide range of chemical compatibility and working temperatures up to 260°C, it is recommended that such applications are again discussed with us.

Space required to withdraw filter element Clean Dirty Clean Dirty Space required to withdraw filter element SPX Flow Technology Hambridge Road, Newbury, Berkshire, RG14 5TR, UNITED KINGDOM T: +44 (0) 1635 263915 F: +44 (0) 1635 36006 E: [email protected] For more information about our worldwide locations, approvals, certifications, and local representatives, please visit www.spx.com and www.airpelfilters.com. SPX Corporation reserves the right to incorporate our latest design and material changes without notice or obligation. Design features, materials of construction and dimensional data, as described...