Catalogs >
SPS electronic GmbH >
Test adapter

Test adapter
1Pages

Catalog excerpts

fest adapters System Example Adapter Electric Drill » via standardized plug and socket connections all of the test cages and test adapters we supply to the customer are interchangeable » single function adapters are manually adjustable via carriage and limit switch, this means variants can be tested also a pneumatic clamping unit for defined test positions » screws for the enclosure are pneumatically contacted with spring contact pins in 4-wire technique -with this method a missing screw can be pin pointed » the gear housing is pneumatically contacted with two carbide tipped rotary contact pins -this way coats of lacquer can be penetrated » the pole shoe is contacted with carbide tipped spring contact pins through an opening in the enclosure » the contact control in the armature and the pole shoe is made via current recognition contacts » the switching on or off of the DUT is solved pneumatically by means of a special adapter -(the ON switch must not be locked after having been activated) » the number of revolutions and the sense of rotation is performed via a live spindle with integrated pinion and special sensor » all PASS DUTs are identified at their plastic enclosure with a hot forming punch -these forming punches can be exchanged manually electric drill rotor Rotor, Hand Circular Saw The pictures shown represent a small selection of the successfully solved tasks which were set us. hand circular saw Headquarter: Blttercker 18 I D-74523 Schwࠠbisch Hall Phone +49 7907 878-0 I Fax +49 7907 878-99 info@spselectronic.com I www.spselectronic.com Settlement North: BoschstraRe 15 I D-49767 Twist Phone +49 5936 91815-0 Fax +49 5936 91815-99

Open the catalog to page 1

Test adapter
1Pages

Catalog excerpts

All SPS electronic GmbH catalogs and technical brochures

Archived catalogs

Test adapter 1Pages

Catalog excerpts

All SPS electronic GmbH catalogs and technical brochures

Archived catalogs

Test adapter
1Pages