1. Catalogs
  2. SPS electronic GmbH
  3. Insulation Tester IS 6600H, IS 6680H

Insulation Tester IS 6600H, IS 6680H

Insulation Tester IS 6600H, IS 6680H

Insulation Tester IS 6600H, IS 6680H

Product catalog summary
Overview: The document provides technical specifications and usage guidelines for the Insulation Tester models IS 6600H and IS 6680H, designed to measure the insulation of electrical devices. These testers are applicable for both protection class I and II devices, using a standard test voltage of 500 V DC.
Specifications:
  • High Voltage Test: DC Voltage Range: 100 V - 6000 V, Current Range: 0 mA - 20 mA, Short Circuit Current: >20 mA, Residual Ripple: < 3%.
  • Insulation Measurement: DC Voltage Range: 100 V - 6000 V, Measuring Range: 100 kΩ - 50 GΩ, Residual Ripple: < 3%.
  • Digital Interface: 24 VDC Input and Output, 4 each.
  • Mains Supply: Voltage: 90 V - 250 V, Frequency: 50 Hz / 60 Hz.
  • Computer Interfaces: Ethernet/LAN and USB available.
  • Operation: Keypad for input with a 7"-TFT colour display.
  • Dimensions and Weight: IS 6600H: Height: 148 mm (5.8 in), Width: 420 mm (16.5 in), Depth: 508 mm (20.0 in), Weight: 20.4 kg (45.0 lbs). IS 6680H: Height: 133 mm (5.2 in), Width: 482 mm (19.0 in), Depth: 439 mm (17.3 in), Weight: 20.4 kg (45.0 lbs).
Key Features:
  • Ability to detect insulation weaknesses between electrical conductors and protective conductors/device housing.
  • Suitable for identifying poor insulation on air and creepage distances.
Notes: The document highlights regional differences in numerical notation, with Europe using a comma and the USA using a period as separators.
See more

Catalog excerpts

Insulation Tester IS 6600H, IS 6680H-1

Insulation Tester IS 6600H, IS 6680H Insulation Tester make it possible to measure the insulation of an electrical device. The insulation test must be carried out on both protection class I (with PE protective conductor) and protection class II (without PE protective conductor) devices. When measuring the insulation resistance, a test voltage of 500 V DC is usually applied. Insulation weaknesses between any electrical conductors to the protective conductor / device housing Insulation weaknesses between the electrical conductors Poor insulation on air and creepage distances Insulation Tester IS 6600H, IS 6680H | 11.2025 Subject to change and error. Please note: that in Europe, we use a comma as the separator, while in the USA, a period is used.

 Open the catalog to page 1
Insulation Tester IS 6600H, IS 6680H-2

Subject to change and error. Please note; that in Europe, we use a comma as the separator, while in the USA, a period is used.

 Open the catalog to page 2

All SPS electronic GmbH catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.
About DirectIndustry
DirectIndustry is a marketplace that offers B2B players a complete experience, from product sourcing to purchase. DirectIndustry is an entity of VirtualExpo Group.