AI 5601D
1Pages

Catalog excerpts

Safety tester Single devices Leakage current test devices AI 5601D The safety test of electrical devices must, after having been tested without current and depending on the relevant test standard, be completed by a line leakage measurement with increased rated voltage. Only by means of a line leakage test is it possible to activate the internal controls in case of electro-mechanical devices. Series AI 5000 offers 3 different techniques. While tester AI 5000A draws its test voltage directly from the power supply, tester AI 5000P applies a safety isolating transformer. A further and important feature of the testers is the cutting-in. With tester AI 5601D an operating mode change-over is possible without turning off the supply voltage of the DUT. Technical Data output (main voltage 230 VAC) 230 V - 256 V / 16 A potential power supply phases 1 output (main voltage 115 VAC) 115 V - 128 V / 16 A potential power supply phases 1 operating modes earth leakage current test touch current test simulation first fault recognition phase yes measuring rang interruption when changing mode of operation plug-in 19“ / 4 HU power supply Headquarter: Blätteräcker 18 | D-74523 Schwäbisch Hall Phone +49 7907 878-0 | Fax +49 7907 878-99 info@spselectronic.com | www.spselectronic.com Special features conforms to CE, in accordance with EN 50 191 optical and audible alarm analogue measuring instrument for voltage, class 1.5 analogue measuring instrument for current, class 1.5 potential free PLC remote control interface potential free analogue output for voltage (0 up to 10 VDC) potential free analogue output for current (0 up to 10 VDC) built-in adjustable stress increase from 100% up to 110%

Open the catalog to page 1

AI 5601D
1Pages

Catalog excerpts

All SPS electronic GmbH catalogs and technical brochures

Archived catalogs

AI 5601D 1Pages

Catalog excerpts

All SPS electronic GmbH catalogs and technical brochures

Archived catalogs

AI 5601D
1Pages