Replacing 1ph DC drives
5Pages

How You Can Replace Obsolete Single Phase DC Drives Easily With Control Techniques now stopping production of their single phase DC drives, you can use this guide to find a replacement from Sprint Electric. www.sprint-electric.com

ALL SUITABLE FOR REPLACING The Puma SM DC Controller The Puma SM series of DC motor speed controllers are designed for speed control of conventional wound-field and permanent magnet motors in the 0.18 to 0.37 kW range. MODEL 370 3.7Amps (0.55KW/0.75HP). Non Isolated Simple, reliable and compact. Make controlling DC motors easier with adjustable parameters including: minimum and maximum motor speed, armature current, up ramp and IR compensation. MODEL 400 4.0Amps (0.55KW/0.75HP). Non Isolated The model 400’s terminals are compatible with the Puma’s. A compact 1Q controller designed to save...

SUITABLE FOR REPLACING The Lynx SM DC Controller The Lynx SM series of DC motor speed controllers are designed for speed control of conventional wound-field and permanent magnet motors in the 0.55 to 7.5 kW range. MODEL 3200i Up to 48Amps (11KW/15HP). Isolated The model 3200i’s terminals are compatible with the Lynx’s. Available in four current outputs up to 48 Amps, to closely match your motor requirements. To make installation easier, you can quickly connect using screw terminals. Easy to access control terminals, extensive features and I/O make this range of DC motor controllers an...

ALL SUITABLE FOR REPLACING The Cheetah SM DC Controller Cheetah SM DC Drive has a range of outputs, covering 4.5, 6, 8 & 11 amps. MODEL 1200 12Amps (1.8KW/2HP). Non Isolated A compact 1Q controller designed to save you time and cost when upgrading your DC motor control system. MODEL 1200E 12Amps (1.8KW/2HP). Non Isolated The model 1200 is also available in an enclosure like the Cheetah. The IP20 sturdy metal enclosure, on/ off switch and set speed potentiometer make the enclosed drives quick to install and easy to use. MODEL 1220 12.2Amps (1.8KW/2HP). Non Isolated Replace the Cheetah with...

MODEL 3600XRi Up to 36Amps (9.5KW/12.6HP). Isolated. 4Quadrant. Regenerative. This 4 Quadrant regenerative DC motor controller gives a fast controlled response over the full forward/reverse speed range for motoring and braking. Improve your energy efficiency by regenerating energy into the mains supply whilst under braking. The energy invested accelerating the load mass is recovered when braking. No dissipation of energy in wasteful braking resistors. With five models up to 36 Amps, you can closely match the power required by your application. The 3600XRi has a robust design and is packed...