Indexing unit VA with collet ER 32 (470 E) This indexing unit with collet chuck is specially designed for use on wire-EDM machines provided. Through the mounting holes mounting on hole pattern 40 mm and 50 mm by M8 screws is possible. Indexing via indexing plate with 72 positions, the indexing positions by 360°-scale and nonius interim. Scope of delivery 1 Indexing unit with operating instructions Web See below for more details and accessories https://produkte.spreitzer.de/en/clamping/precision-workholdingfor-toolmaking/indexing-units/indexing-unit-va-with-collet-er-32470-e-520. Material Magnetizable chrome steel, rust-resistant Finish Completely hardened Completely precision grinded Fully sealed precision rolling bearings Accuracy Square-accuracy 0,005 mm Parallel-accuracy 0,003 mm Concentricity 0.01mm Indexing precision ±2’ Operation Mechan

Direct dividing head with ER 32 collet, front view Direct dividing head with collet ER 32 from the left Direct dividing head with ER 32 collet from above Direct dividing head with collet ER 32 from below

Plan drawing direct dividing head with collet ER 32 Order Number Note: Your selected variants are marked in orange.