Tank Cleaning Dust Control Conveyor Cleaning Typical Applications Pressure range: 20 to 100 psi (1.4 to 6.9 bar) Flow rate range: 15 to 60 gpm (57 to 227 l/min) Pump and motor: two-stage centrifugal pump; 5 Hp motor TEFC/IP55 Variable frequency drive: NEMA 4X/IP65 rated power switch Materials: stainless steel pump, accessories and pipes. Carbon/ceramic mechanical seal and EPDM O-rings. Powder-coated steel cart Inlet connection: 1-1/2” NPT (F) with shutoff valve and swivel union Outlet connection: 1-1/4” NPT (F) with swivel union Maximum temperature: water* 160°F (71°C); ambient 95°F (35°C) Power: 230VAC/60Hz/3Ph/18.6A Environmental rating: non-hazardous locations only Dimensions: 56” L x 24” W x 38” H (1.4 m L x 0.6 m W x 1 m H) Weight: 255 lbs (116 kg) Specifications VFD touch pad From Benefits • Portable system integrates all components – pump, motor and control – and minimizes manual operation, decreases downtime and reduces water, chemical and energy use • Easy operation – Variable Frequency Drive (VFD) eliminates the need for control valves to throttle flow. Discharge pressure quickly set via touch pad • Saves energy – VFD automatically adjusts speed to maintain pressure. Operating at lower speeds results in energy savings • Economical – Priced well below comparable pump systems • Wide range of spray nozzles – Use with tank cleaning nozzles, general purpose cleaning nozzles and more • Reliable and ready to go – 100% factory-tested system includes power cord and plug • Quick delivery – System ships within 48 hours *Water from city or above ground supply tank. The FDS30100 can be used with liquids other than water. Contact your local sales engineer for assistance. Pump rated at 30 gpm at 100 psi (114 l/min at 6.9 bar) 1.800.95.SPRAY | Intl. 1.630.665.5000 | www.spray.com AutoJet® FDS30100 Fluid Delivery System Easy-to-use, energy-efficient, economical pump system optimizes the performance of a wide range of spray nozzles