Catalog excerpts
![AA250UAH Automatic Spray Nozzle - 1](https://img.directindustry.com/pdf/repository_di/5300/aa250uah-automatic-spray-nozzle-134840_1m.jpg)
AA250AUH Automatic Spray Nozzle Benefits • High-speed capability, up to 7,000 cycles per minute, enables faster line speeds and increased productivity • Using Pulse Width Modulated (PWM) flow control, flow rate can be controlled very precisely by cycling the AA250AUH spray nozzle on and off very quickly at a controlled frequency. With PWM flow control: • Flow rate can be changed almost instantaneously • Extremely high flow turndown ratios can be achieved at a single pressure • Relatively low flow rates can be generated with larger, clog-resistant spray tips • Minimizes overspray and saves costly fluid consumption • Provides better flow control with larger spray tips, which are less prone to clogging • Wide range of flow rates available from a single tip • Provides flexibility in the design of high-speed, lowcapacity spray applications • Compact, lightweight design Coating Lubrication Marking Moisturizing Robotics 1.800.95.SPRAY | Intl. 1.630.665.5000 | www.spray.com Typical Applications Electrically-actuated hydraulic atomizing valve Cycle duration from 9 ms (.009 seconds) to continuous spray Accepts UniJet® tip sizes up to -03 capacity. Request our Industrial Spray Products Catalog for standard UniJet spray tip specifications Built-in mounting bracket accepts #8-32 UNC or M4 threaded screws Wetted parts are constructed of stainless steel and Ryton® for maximum chemical resistance; seals are Viton® CE certified Maximum cycles per minute: 7,000 with AutoJet® Spray Controller Power: 24 VDC actuation, .75 AMP Inlet connection: 1/8” NPT or BSPT Dual ports allow flow through operation or fluid recirculation Maximum operating pressure: 100 psi (7 bar) Maximum flow rates: .47 gpm at 100 psi (1.8 l/min at 7 bar) Maximum fluid operating temperature: 150°F (66°C) Weight: 5 oz. (.14 kg) System Features Provides accurate spray placement and spray pattern integrity in high-speed or lowcapacity applications
Open the catalog to page 1![AA250UAH Automatic Spray Nozzle - 2](https://img.directindustry.com/pdf/repository_di/5300/aa250uah-automatic-spray-nozzle-134840_2m.jpg)
Nozzle without Cable Nozzle with Cable AA250AUH-VI + 98108-5 | | Spray Nozzle 5 Meter Cable Nozzle without Cable AA250AUH Automatic Spray Nozzle Ryton® is a registered trademark of Chevron Phillips Chemical Company LLC Viton® is a registered trademark of DuPont Performance Elastomers AA250AUH Spray Nozzles and AutoJet® Spray Controllers When paired with AutoJet Spray Controllers, the AA250AUH automatic nozzle is capable of fast on/off operation at extremely high speeds – up to 7,000 cycles per minute. These fast cycle times are critical for very precise conveyor belt spraying and also for...
Open the catalog to page 2All Spraying Systems Co. catalogs and technical brochures
-
G U N J E T® S P R AY G U N S
64 Pages
-
WindJet Air Products
28 Pages
-
Air Atomizing Nozzles
62 Pages
-
Fine Spray Nozzles
16 Pages
-
Hollow Cone Nozzles
42 Pages
-
Flat Spray Nozzles
56 Pages
-
Full Cone Nozzles
52 Pages
-
PWM Spray Control Panel
2 Pages
-
Optimizing Your Spray System
47 Pages
-
AutoJet Gas Cooling System
4 Pages
-
PWM Flow Control
2 Pages
Archived catalogs
-
CU150A GunJet Spray Gun
2 Pages