LOW BEARDING NOZZLE CAP

Product catalog summary

Introduction
The document discusses advancements in spray nozzle cap technology, focusing on hygiene, quality, performance, productivity, and reduced operating costs. It highlights the transition from older radial seal caps to the new Gen4 Flat Profile Cap, which eliminates build-up and bearding, allowing for longer run times, especially in high solids and infant formula powders.

Specifications and Improvements
The Gen4 Flat Profile Cap is an update from the Gen3 cap, offering lower bearding, less build-up, longer run times, reduced ignition risks, and improved powder quality. The Seal-In-Disc technology ensures code compliance with lower profiles and smooth internal fluid paths, enhancing safety, quality, and hygiene.

Performance Results
The new cap design has increased run times from 12 hours to 75 hours, setting a site record with no premature bearding or production shutdowns due to dangerous powder build-up.

Technological Advancements
The Click&DryTM Gen1 Safety Cap, introduced in 2007, marked the first improvement in nozzle bearding. The Gen4 Low Bearding Safety Cap further advances this technology with a lower, wider face opening and a new cap profile design that screws in without modification.

Benefits
The new cap design offers improved hygiene, longer life, high performance, and greater return on investment. The Seal-In-DiscTM technology allows for a lower cap profile, reducing product build-up and enhancing hygiene with a smooth internal design free of o-ring grooves or threads.

Contact Information
For more information, contact Spray Nozzle Engineering in New Zealand at +64 7 839 6444 or in Australia at +61 3 9583 2368. Visit their websites at spraydrynozzle.com and spraynozzle.com.

Catalog excerpts

INFO-SHEETS SERIES Screw in with no modification HYGIENE | LONG LIFE | HIGH PERFORMANCE | GREATER RETURN New Lower Cap Profile: Less Build-Up - Less Bearding = Longer Run Times THEN - We introduced lower cap profiles for spray drying CD Gen1 Cap vs old radial seal caps: Less build-up, reduced bearding, allowed longer runs, safer assembly and code compliance. Now Spray Nozzle Engineering introduces Gen4 Flat Profile Cap totally eliminating build-up and bearding, allowing longer run times for high solids and infant formula powders. Click&DryTM Gen1 Safety Cap The first inprovement in nozzle bearding introduced in 2007 Typical old nozzle caps non Click&DryTM with radial seal NOW - We reduce cap profiles even more New lower profile Standard Click&Dry Gen3 Cap (original D profile) Was again another step forward in low bearding New Gen4 F Profile Lower wider face opening Nozzle cap available thanks to Seal-In-Disc technology It’s all about hygiene, quality, performance, productivity and reduced operating costs Latest CD Gen4 Flat Profile: Lower bearding cap, 75 hours, FFWMP. Customer conversion from conventional old style radial seal cap to Click&Dry Low bearding cap. Run times increased from 12 hours to 75 hours a site record, no premature run bearding and no production shuts due to dangerous powder bearding build-up. New Gen4 F Profile: Updates our current Cick&Dry Gen3 cap. Lower bearding caps give less build-up, reduced bearding, longer run times, reduces ignition risks and increased powder quality. The seal n disc technology allows code compliance with lower profiles and smooth internal fluid paths. A major improvement in safety, quality and hygiene. Click&DryTM Gen4 Low Bearding Safety Cap CAN YOU RISK NOT USING CLICK&DRYTM ? Click&Dry TM Your partner in Spray Dry Nozzle Safety spraydrynozzle.com - spraynozzle.com Seal-In-DiscTM allows for a lower cap profile to further reduce product build-up (bearding). The smooth internal cap design has no o-ring grooves or threads for better hygiene. Seal-In-DiscTM © 2018 Click&Dry TM. All Rights Reserved

Open the catalog to page 1

LOW BEARDING NOZZLE CAP

LOW BEARDING NOZZLE CAP

Catalog excerpts

All SPRAY NOZZLE ENGINEERING catalogs and technical brochures