Unistream – Standardised Pumps Unistream End Suction Pumps conform to EN 733/DIN 24255 dimensional standards for use in industrial, building services and many OEM applications. This range is designed with a back-pull out facility allowing removal of the hydraulic rotating element without disturbance of the pipework or motor. Other mainline features include impellers cut to duty thus saving energy consumption without extending the standard delivery. Unistream hydraulics components are interchangeable with the close coupled Eurostream and Instream, therefore, saving stock holding of spare parts within factories or buildings. Typical Applications: • Circulating duties • Water boosting • Irrigation • Heating and air conditioning • Fuel transfer • Process cooling

Specifications Standard: Pumps Models: Discharge Range Sizes: 160ºC maximum with cooled packed gland -10ºC minimum 2 Maximum Capacity: Maximum Differential Design Features Sealing Options: Soft-packed or mechanical seal TEFV, Flameproof motor can also remain in place if a spacer coupling is fitted. Drip proof can be fitted Shaft carried in oil lubricated rolling contact bearings Double shrouded design of impeller with back balancing vanes or, Variable Speed: Back-pull-out facility permits removal of back cover, stuffing box and impeller without disturbance of suction and delivery pipework. Drive...

Unistream - Standardised Pumps Optimum point Optimum point • Back pull-out facility for ease • Various material options available • Impellers cut to duty point • Vast interchangeability

Unistream - Standardised Pumps 50 Hz 1450 R.P.M. 20 20 Optimum point SHAFT MODULE 25 Optimum point Optimum point SPP reserve the right to continually develop and improve products. Information contained herein is for guidance only and subject to change. SPP Pumps Ltd accept no liability whatsoever for any damages either direct or consequential resulting from the use of such information

Unistream - Standardised Pumps 20

Unistream - Standardised Pumps 2p0ie • Back pull-out facility for ease • Various material options • Impellers cut to duty point • Vast interchangeability SPP reseive the right to continually develop and improve products. Information contained herein is for guidance only and subject to change. SPP Pumps Ltd accept no liability whatsoever for any damages either direct or consequential resulting from the use of such