Sabre Saws
8Pages

SABRE SAWS PNEUMATIC HYDRAULIC ATEX

SYSTEM CONCEPT Saw blade with cutting guide Tool change Handle with starting lock Tool holder Pneumatic connection ATEX-Safety class approved Sound absorber, sintered metal

PNEUMATIC Lightweight and handy pneumatic sabre saw for universal use, as well in explosive areas. ATEX Specification Stroke length Noise level LpA/LwA Vibration level 19.3 (wooden beam) Subject to technical change. Performance data at an operating pressure of 6 bar. PNEUMATIC Pneumatic sabre saw suitable for underground mining. ATEX Specification Stroke length Noise level LpA/LwA Vibration level 17.3 (wooden beam) Subject to technical change. Performance data at an operating pressure of 6 bar. PNEUMATIC Pneumatic sabre saw with increased cutting speed and quick release tool adapter. ATEX...

SYSTEM CONCEPT Saw blade with cutting guide Tool change Handle with starting lock ATEX-Safety class approved Hydraulic connection

HYDRAULIC The hydraulic sabre saw with higher drive performance for hardest cutting demands, as well for underwater operation. ATEX Specification Volume flow l/min Vibration level UNDERWATER OPERATION 19.3 (wooden beam) Performance data at an operating pressure of 90 (140) bar. Subject to technical change. CARRYING CASE Water and dust-tight resistant plastic carrying case with two strong twin-lightway-rollers and swing out handle. Application picture: 1) Carrying case with inserts Carrying case complete with accessories Contents : Carrying case with inserts1), 1xCarrying box2) TECHNICAL DATA

thin metal plates rough and fast cuts from 2 mm cross section from 1.5 mm cross section for pipes, profiles, plates High stress steel Rust-resistant steel Non-ferrous metal All SPITZNAS saw blades cut on backward stroke. Min. length of blade (freehand operation) = max. cross-section + 30 mm. Other lengths and tooth pitches on request. Metal universal thin metal plates rough and fast cuts from 2 mm cross section from 1.5 mm cross section for pipes, profiles, plates High stress steel Rust-resistant steel Non-ferrous metal Metal universal Steel (solid material) Cast iron pipes (cement coated...

CLAMP FOR PIPES Clamp for rectangular cuts, pipes up to dia. dia. 100 mm and dia. 150 mm. Clamp for pipes up to dia. 100 mm for rectangular cuts Clamp for pipes up to dia. 150 mm for rectangular cuts PERFORMANCE KIT Performance Kit for increasing the cutting speed by reducing the stagnation pressure (causing a higher noise level as a result). ORDER NO. Performance Kit for higher cutting speed TECHNICAL DATA

SYSTEM ACCESSORIES SERVICE UNITS ORDER NO. Service unit, portable, pressure regulator 3/4“ Service unit, portable, protection housing, pressure regulator 3/4“ HOSES AND MORE ORDER NO. Pneumatic pressure hose ID 13 mm, 2.5 m length, screw-on claw coupling Pneumatic pressure hose ID 16 mm, 2.5 m length, screw-on claw coupling Pneumatic pressure hose ID 19 mm, 2.5 m length, screw-on claw coupling Claw coupling, metal sealing, 3/4” ID Hydraulic hose set for type 5 1219 MISC. ACCESSORIES ORDER NO. Carrying case for type 5 1219 Carrying case for type 5 1217 and 5 1218 Multi oil for cleaning and...