Core Drill Units
8Pages

CORE DRILL UNITS PNEUMATIC HYDRAULIC ATEX

SYSTEM CONCEPT Drill bit adapter and water connection Handle with switch lock ATEX-Safety class approved Additional handle Gear box with three gear speeds

PNEUMATIC The core drill unit for drillings up to diameter 160 mm in concrete, stone and masonry. OPERATING PRESSURE ATEX Specification Gear Speed stages (free) Vibration level Subject to technical change. Performance data at an operating pressure of 6 bar. PNEUMATIC The core drill unit for drilling up to diameter 160 mm in concrete, stone and masonry, as well as for underwater operation. OPERATING PRESSURE ATEX Specification Gear Speed stages (free) UNDERWATER OPERATION Vibration level Subject to technical change. Performance data at an operating pressure of 6 bar. PNEUMATIC The core drill...

SYSTEM CONCEPT Gear box with three gear speeds Valve control for drilling with drill rig ATEX-Safety class approved Drill bit adapter and water connection Handle with switch lock

HYDRAULIC The core drill unit for drilling up to diameter 160 mm in concrete, stone and masonry, as well as for underwater operation. ATEX Specification Volume flow Gear stages UNDERWATER OPERATION Vibration level Speed (free) Subject to technical change. Performance data at an operating pressure of 140 bar. HYDRAULIC The core drill unit for drilling on drill rig up to diameter 300 mm in concrete, stone and masonry. The stand is not included in the delivery of the machine and has to be ordered seperately. Stand ORDER NO. 9 4101 0090 ORDER NO. 9 4101 0090 OPERATING 140 PRESSURE Bar ATEX...

SYSTEM ACCESSORIES DRILL RIGS The core drill unit will be fixed with a center diameter of 60 mm. ORDER NO. Drill rig for angular holes under 45°-90° up to dia. 160 mm, for type 2 1333, 2 1335, 2 1353, 2 1355, 2 1317 Drill rig for angular holes under 45°-90° up to dia. Ø 300 mm, for type 2 1327, 2 1328 CLAMP FOR PIPES The clamp is used to fix the drill rig type 9 4101 0080 on pipes. ORDER NO. Clamp for pipes, to use with drill rig type 9 4101 0080 DRILL CHUCKS Drill chucks for drill bits with cylindrical shank end. ORDER NO. Adapter from 1 1/4“ UNC female to M18x1.5 male Adapter from 1 1/4“...

DRILL BITS The wet-drill bits can be used for reinforced concrete as well as for masonry. More diameter and types on request. Optimum drilling speed [rpm]

SYSTEM ACCESSORIES SERVICE UNITS ORDER NO. Service unit, portable, pressure regulator 3/4“ Service unit, portable, protection housing, pressure regulator 3/4“ HOSES AND MORE ORDER NO. Pneumatic pressure hose ID 19 mm, 2.5 m length, screw-on claw coupling Claw coupling, metal sealing, 3/4” ID Hydraulic hose set for type 2 1317 0030 Hydraulic hose set for type 2 1327 0010 MISC. ACCESSORIES ORDER NO. Multi oil for cleaning and protection DRILL RANGE CORNER DRILLS HAMMER DRILLS CORE DRILL UNITS MAGNETIC CORE DRILLS DRIVE UNITS DRILLS/ IMPACT DRILLS Maschinenfabrik GmbH I Fellerstrasse 4 I 42555...