ATEX DIRECTIVE 2014/34/EU (extra By implementing the ATEX Directive 2014/34/EU for the manufacturer and the ATEX Directive for the operator, the European Community established a basis for a uniform european explosion protection. According to the ATEX directive 2014/34/EU the manufacturer has to meet the following requirements: • Conformity assessment procedure • Classification of equipment groups and categories • Manufacturing and testing of the equipment • Issuing the declaration of conformity According the ATEX directive 99/92/EC, the operator has to comply with the following obligations: •...

CHECKLIST The hazardous zones and areas should be identified including those where there could be short working time. The safety officer will ensure compliance with relevant safety regulations. The following points should be observed to ensure safe working and assist in preparing a Safety Case (extract): Observe machine operating instruction Only use approved safety equipment and clothing Only qualified and skilled persons should carry out the work Use only Tools, Accessories and Components which are in good condition, clean and dirt free Check leakages and correct immediately Ensure the function...

SYSTEMCONCEPT SOLUTIONS

PRODUCT RANGE POS. Description 3 Retaining chain with hook Nipple assembly Service unit Pneumatic hose Water cooling Butt strap Earthing cable Ball valve assembly SYSTEM CONCEPT

Specification max. dia. dia. in steel (free) consumption LpA level The handy pneumatic drill for universal use, drill chuck up to 13 mm drilling diameter, speed adjustable with 4 switching steps, rotation left and right (reversible). Subject to technical change. ORDER NO. <£x> ATEX Tool Specification holder Drilling capacity Speed Percussion Power Air dia. in concrete (free) consumption Noise level Vibration Weight LpA level Subject to technical change. Specification holder type of rotation diameter in steel under load consumption level LpA level Subject to technical change. Performance data...

PNEUMATIC The pneumatic drive unit with OPERATING PRESSURE ATEX Specification Tool holder Valve (female) type Speed under load Vibration level Subject to technical change. Performance data at an operating pressure of 6 bar. PNEUMATIC Our robust pneumatic air movers made of stainless steel are based on the venturi principle. They are maintenance and wear-free and can be used in ATEX-Safety class category I. The functional handle ensures mobile working in universal applications. OPERATING PRESSURE ATEX Specification Nominal diameter (outer) Length Volume flow (unrestricted) at Air Connection consumption...

TECHNICAL DATA PNEUMATIC The pneumatic band saw is the ideal tool for all cutting work. ATEX Specification OPERATING PRESSURE Subject to technical change. Vibration level Performance data at an operating pressure of 6 bar. PNEUMATIC Lightweight and handy saw for universal use. OPERATING PRESSURE ATEX Specification Number of Noise level strokes (free) LpA/LwA Vibration level 16.3 (wooden beam) Subject to technical change. Performance data at an operating pressure of 6

Our pneumatic reciprocating saws with twist throttle or lever control. ORDER NO. ATEX Housing Specification material Valve Power Number Stroke Air Noise Vibration Connection Hose type of strokes consumption level LpA level ID min. Subject to technical change. The pneumatic drive unit for the pipe cutting machine with low speed for cutting and bevelling* of pipes made of different material: • Non-ferrous metal Steel* Ductile iron Concrete • Cement • Clay Plastics PE • PVC • GRP ORDER NO. <|x) ATEX Specification consumption blade dia. holder Speed Max. cutting Height Noise Vibration Weight depth...

Our handy pneumatic impact wrench with little weight. Square for screws Max. torque* Air Subject to technical change. *applying on screw strength class 8.8 Distance Hose Noise Vibration Weight center to ID level LpA level outer edge Performance data at an operating pressure of 6 bar. Our powerful impact wrenches with slim design. Square for screws Max. torque* Air Distance Hose Noise Vibration Weight center to ID level LpA level outer edge Performance data at an operating pressure of 6 bar. Distance Hose Noise Vibration Weight center to ID level LpA level outer edge Subject to technical change....

PNEUMATIC HOSE The pneumatic hose for air supply of the machine according to ATEX IIC atmosphere. ORDER NO. Pneumatic hose ID19x6, 5 m length, incl. stainless steel claw couplings EARTHING CABLE Imperative for all ATEX IIC tools. The total length with gripper is 1.5 m. ORDER NO. Earthing cable 1.5 m with grip SUSPENSION BRACKET The suspension bracket will be mounted directly on the sabre saw/impact wrenches. ORDER NO. Suspension bracket Suspension bracket Suspension bracket NIPPLE ASSEMBLY The nipple will be mounted directly on the air inlet of the machine and is used for connecting the earthing...

SYSTEM ACCESSORIES ESD SAFETY MAT Electrostatic dissipative safety mat with good non-slip characteristics (R9 to DIN 51130 and BG rule BGR181). ORDER NO. ESD safety mat, 91 cm x 200 cm x 1.4 cm, antistatic, incl. 4.5 m earthing cable SERVICE UNIT The service unit ensures the safe and wear-optimized operation of the machine. ORDER NO. 9 2406 065C Service unit portable with protection housing G 3/4“, incl. pressure regulator, water absorber and oiler 9 2006 0970 Ball valve assembly G 3/4“ (incl. claw couplings) ESD CARRYING CASE The ESD carrying case made of conductive plastic provides additional...