SLOTTED SPRING PINS

WHAT ARE SLOTTED SPRING PINS? Slotted Spring Pins are general purpose components used in various fastening applications. Compressed as it is installed, the pin applies continuous pressure on the sides of the hole wall. The primary spring action of the Slotted Pin is focused on the area opposite the slot as the two halves of the pin compress during installation. This flexibility allows Slotted Spring Pins to accommodate wider hole tolerances than rigid Solid Pins which results in reduced manufacturing costs of the mating component. • SPIROL Standard Slotted Pins have a slot width narrower than...

• SPIROL has over 75 years of experience in producing quality pins with full lot traceability back to the raw material. Raw materials are RoHS, REACH, Conflict Mineral, and DFARS compliant. • SPIROL has a global footprint with a physical presence in the US, Canada, Mexico, Brazil, England, France, Germany, Spain, Poland, Czech Republic, China and South Korea. • SPIROL’s production facilities are IATF 16949, ISO 9001, and ISO 14001 certified. The customer is assured that each shipment is from the same source produced on the same equipment to the highest quality standard. • SPIROL is a direct supplier...

STANDARD SLOTTED SPRING PINS SPECIFICATIONS & TECHNICAL DATA MATERIAL IDENTIFICATION CODE Slotted Pin 6mm diameter x 32mm length carbon steel/plain finish HOW TO MEASURE THE DIAMETER OF A SLOTTED SPRING PIN SPIROL Standard Slotted Pins are manufactured and inspected to be within diameter specifications along the full diameter with the exception of the slot region. The outside diameter is to be measured with a micrometre per the schematic below. The pin must also pass through a go ring gauge.

SLOTTED PIN SPECIFICATIONS STANDARD METRIC Chamfer both ends. Contour of chamfer optional. DESIGNED FOR AUTOMATIC FEEDING AND INSTALLATION METRIC SPECIFICATIONS NOMINAL STANDARD SIZES NOMINALDIAMETER 1.5 Over 24mm to 50mm incl. ± 0.50mm Over 50mm to 75mm incl. ± 0.60mm Available in high carbon (B) and stainless steel (C, D) Only available in high carbon (B) Generally stocked size 1 Shear tests performed in accordance with ASME B18.8.4M & ISO 8749 • All dimensions apply prior to plating2 The straightness over the length of the pin shall be such that the pin will • Other sizes and materials available...

SLOTTED PIN SPECIFICATIONSISO 8752 METRIC METRIC SPECIFICATIONS NOMINAL . Only available in high carbon (B) and austenitic stainless steel (D) Only available in high carbon (B) Generally stocked size 1 Shear tests performed in accordance with ISO 8749. Shear strength for austenitic stainless steel is not specified. • Other sizes and materials available to order

SLOTTED PIN SPECIFICATIONS STANDARD INCH LENGTH tr Chamfer both ends. Contour of chamfer optional. DESIGNED FOR AUTOMATIC FEEDING AND INSTALLATION INCH SPECIFICATIONS NOMINAL STANDARD SIZES NOMINAL ► Available in high carbon (B) and stainless steel (C, D) Generally stocked size 1 Shear tests performed in accordance with ASME B18.8.2. 2 The straightness over the length of the pin shall be such that the pin will pass freely through a ring gauge of the length and diameter specified. • All dimensions apply prior to plating • Other sizes and materials available to order • ASME B18.8.2 is based on...

STANDARD MATERIALS TYPE CARBON STEELS Carbon steels are the most cost effective and versatile materials available for use in Slotted Spring Pins. These materials are readily available, easy to process, and have very uniform and predictable performance characteristics. The most noticeable limitation to these materials is corrosion protection. In most applications, the normal rust preventative oil is adequate for corrosion protection. In cases where extra protection is necessary, the benefits of supplemental coatings and stainless steel must be evaluated. High carbon steel is one of the most versatile...

Protective finishes are generally used to improve the corrosion resistance of the base metal. There are many different coating types, such as electroplating, chemical conversion, immersion, and mechanical applications. Each of these processes has limitations when applied to Slotted Spring Pins and depending on the application there may be other concerns. SPIROL has extensive experience in recommending and selecting the right combination of material and finish for a variety of applications. Given the propensity for ISO Slotted Pins to interlock during processing, only SPIROL Standard Slotted Pins...

SHEAR PROPERTIES WHAT IS SHEAR STRENGTH? The shear strength of a Slotted Pin is determined by the maximum amount of force the pin can withstand before it breaks when the force is applied perpendicular to the axis of the pin. Pins can be sheared in multiple planes, for example, a pin that breaks in single shear would result in two separate pieces of the pin, whereas a pin that breaks in double shear would result in three separate pieces of the pin. The three prevailing industry standards (ASME, ISO, and JIS) specify a minimum shear strength for Slotted Spring Pins and specific parameters under...

DESIGN GUIDELINES LOCATING AND ALIGNMENT DESIGN SHAFT DESIGN To achieve optimal alignment when using Slotted Pins, two primary design elements must be adhered to: 1) The hole diameters in the host and mating component must be sized accordingly to achieve the desired interference and accuracy of alignment. 2) In all applications, the engagement length of the Slotted Pin in the component providing primary retention must be no less than 60% of the pin’s overall length. The remaining protruding length will align with the mating component. Increasing the initial length of engagement is recommended...

DESIGN GUIDELINES HINGE DESIGN HOLE DESIGN There are two primary types of hinges: 1) a free fit hinge has little to no friction or drag when the latch or handle is rotated. Hinge components are “free” to rotate independent of one another, and 2) a friction fit hinge requires interference to prevent free rotation of components relative to one another. Depending on design intent, resistance can vary from a slight drag to a value sufficient to maintain the fixed position of components anywhere in their full range of rotation. It is important to note that the recommended hole sizes (on pages 3-5)...