STANDARD EXTENSION SPRING ASSEMBLIES EXTENSION SPRINGS

Product catalog summary

Overview: This document provides a detailed specification of standard extension spring assemblies, including various models with their respective load capacities, extensions, materials, and fatigue life cycles. The springs are primarily made of stainless steel, with nylon molded bobbins and brackets, and a sheet aluminum base.

Specifications:

Spring Models: The document lists multiple spring models, each identified by an assembly number and spring number.
Load and Extension: Each spring model is characterized by its load capacity in Newtons and kilograms, with a specified extension in millimeters.
Material and Fatigue Life: The springs are made from stainless steel, and the document provides average fatigue life cycles for each model, ranging from 5,000 to 200,000 cycles.

Key Data:

Load Range: The load capacities range from 2.2 Newtons to 93.7 Newtons.
Extension Range: Extensions vary from 16 mm to 51 mm.
Fatigue Life: The fatigue life cycles vary significantly, with some models offering up to 200,000 cycles.

Materials: The springs are constructed from stainless steel, with additional components made from nylon and aluminum.

Note: All figures are for reference only, and detailed specifications should be obtained by contacting the sales department.

Catalog excerpts

STANDARD EXTENSION SPRING ASSEMBLIES EXTENSION SPRINGS-1

STANDARD EXTENSION SPRING ASSEMBLIES EXTENSION SPRINGS ASSEMBLY NOTE: ALL FIGURES STATED ARE FOR REFERENCE ONLY, FOR DETAILED SPECIFICATION CONTACT OUR SALES DEPARTMENT. MATERIALS: STAINLESS STEEL SPRINGS, NYLON MOULDED BOBBIN & BRACKET, SHEET ALUMINIUM BASE.

Open the catalog to page 1

All Spiroflex catalogs and technical brochures

Archived catalogs

adjustable spring balance
2 Pages