CelsiPick® 2005 series Data logger with new & brilliant software, and new, hardship enduring hardware CelsiPick® is a highly dependable and reliable Temperature datalogger with internal 3.6 Volt Lithium battery. Each channel can store up to 16'383 readings. The stored data is protected against battery failure. Battery life good for at least one year. To START undelayed, or delayed to a specified date / time - use a calendar like table- , the ...Pick is temporarily connected by a Data Transfer Cable (DTC) to a free COM or USB port on a PC. The final set-up is then done almost automatically by the software. START erases former data on logger. Pick® models also with manual start button. CelsiPick® Temperature- / Time- logger HumiPick® Humidity- / Time- logger PressPick® Pressure- / Time- logger VoltPick® Voltage- / Time- logger pH, shock, and more in preparation. Define Mission (select pick rate between two seconds or in many steps up to 12 hours), give the mission a filename and then disconnect Data Transfer cable from logger. You could give any number of ...Picks the same start date/time and then for example distribute them in a building for a climate control check. All these ...Picks then will start data collection at exactly the same second. Mission completed, but also during the mission, the data can be displayed by reconnecting the ...Pick to the PC and data be followed real time as the data collection continues undisturbed. Read-out data are immediately displayed or printed as a graph. Crosshair on graph will pop-up the values. Both axes as well as sections of the graph can be zoomed. Display will automatically zoom to the max of existing data values. Data can be exported as text or directly into EXCelsiPick® Module ECO-TR # 16020: CEL sheets or as software calculated values. Software calculates statistics with MINIMUM, Range -40°C ... +80°C / resolution 0,5°C / Accuracy ±0.5°C / 16'383 storage locations / Start button / lithium battery with 2 years life / internal clock ± 1 MAXIMUM, MEDIUM and standard deviation. min per month / 36 x 56 x 16 mm. Complete-Kit # 16143: composed of 1 CelsiPick® Eco-TR #16020 1 Data transfer cable #16816 1 Program on CD #16068 Manual on CD. Packed in a plastic case. Universal Software for all applications Clever software package handles all applications, from temperature (internal sensors, external thermocouple J, K, T, E, R, S, B, N inputs), humidity, pressure, electric voltage and current, pulses, events, counting, fluid levels, shock, position. More physical parameter loggings in preparation. Software can be copied. Minimum hardware demand Pentium or higher. Runs on Windows 95 / 98 / 2000 / NT / XP, 16 MB RAM, 800 x 600 monitor, free disk ar- Data transfer cable (DTC, adapter). Only one piece needed. The DTC decouples DataPick® and PC ea 10 MB , CD-ROM, 9-Pin male COM-Port or USB. COM or USB Port. Spirig Ernest Dipl.-Ing.

Data-Loggers with new & brilliant software and # Stop Recording X Clear Recording Select Reading Rate |lQ Seconds ^] As long as the DataPick® is connected to the COM or USB port of the PC the measurement data collected can be displayed on the PC screen in real time. Usually a DataPick® mission is remote and disconnect- ed from the PC. Mission over the DataPick® will be connected again to the PC. The data stored in the DataPick® are transferred with a simple command These now PC resident data can be immediately dis- played as a graph or table of data (value and time) on the scree. Also a direct...

HumiPick® 2005 series data logger with new & brilliant software, and new, hardship enduring hardware The HumiPick® with internal 3.6 Volt Lithium battery is a highly dependable and reliable 2-channel humidity AND temperature datalogger with internal humidity and temperature sensor. Each channel can store up to 21'845 readings.The stored data is protected against battery failure. Pick intervals: User programmable from one pick each two seconds to one per twelve hours. Pick capacity: Depending on model up to and over 21'845 permanent pick readings canbe stored. One pick per minute might allow a...

MONO-TC- CelsiPick® 2005 series Data-Loggers with new & brilliant software and a challenging hardware. The Mono-CelsiPick® with internal 9 Volt Lithium battery is a MONO - CelsiPick® highly dependable and reliable temperature datalogger capable to handle one external channel with all standard J, K, T, E, R, S, B and N type thermocouples. A second internal channel records the temperature of the CelsiPick® itself. Each channel can store 16'383 readings. The stored data is protected against battery failure. To START (immediate or start on date / time) the CelsiPick® is using an adapter cable DTC-......

Quad / Octa- CelsiPick® Data-Loggers with new & brilliant software and a challenging hardware. The QUAD-CelsiPick or OCTA-Celsi CelsiPick with in- QUAD - CelsiPick® 4-channel recording ternal 9 Volt Lithium (or Alkaline battery) are highly dependable and reliable temperature dataloggers capable to work on four respectively eight channels with all standard J, K, T, E, R, S, B and N type thermocouples. Selected type then for all channels. Each channel can store 26'214 (4-ch.) or 14'563 (8-ch.) readings. The stored data is protected against battery failure. To START (immediate or start on date /...

Eco-TT CelsiPick® data logger with new & brilliant software, and new, hardship enduring hardware CelsiPick ECO-TT is a highly dependable and reliable temperature datalogger with internal 3.6 Volt Lithium battery. The Eco-TT can store up to 8'191 readings which are protected against battery failure. Battery life is good for at least one year. The To START undelayed, delayed to a specified date / time (use a calendar like table) or manually by push button on Eco-TT, the ...Pick is temporarily connected by a Data Transfer Cable (docking station) to a PC's free COM-port or by an USB adapter to an...