Spinelli FIXING LEVELLERS
36Pages

The choice of the cylinder is made considering that the load is greater than or equal to the nominal maximum load of the agent during operation of the machine. The maximum permissible load is used to verify that the cylinder is not damaged by accident during the leveling of the bed of the machine during installation.

MACHINE FIXATORS MAXIMUM VERTICAL ADJUSTMENT ADJUSTMENT SCREW AROUND LEVELLER’S WEIGHT TORQUE MOMENT ADJUST. SCREW

WSP/F MOUNTING POSITIONS VARIABLE Note: All dimensional units are millimeters WSP/M PROTECTION OF THE SPHERICAL WASHER

BASIC DIMENSIONS MINIMUM HIGH MAXIMUM HIGH MAXIMUM FORCE ALLOWED TORQUE MOMENT LEVELLER’S WEIGHT The DS leveller allows an horizontal leveler with a higher lift. 07

BASIC DIMENSIONS MINIMUM HIGH MAXIMUM HIGH MAXIMUM FORCE ALLOWED TORQUE MOMENT LEVELLER’S WEIGHT The MS leveller is used to level radial drills, lathes, transfer etc. 10

MINIMUM HIGH MAXIMUM HIGH MAXIMUM FORCE ALLOWED CENTRAL PIVOT HIGH ADJUSTABLE LAP ALS 1 levels small machine tools in an easy way with accuracy. MINIMUM HIGH MAXIMUM HIGH MAXIMUM FORCE ALLOWED CENTRAL PIVOT HIGH ADJUSTABLE LAP ALS 2 is used to level the machine tools of medium dimension with the best easy way with accuracy. 11

ALS 1 - ALS 2 LEVELER WITH ANCHOR BOLT

MACHINE LOAD Spinelli Sas’ CSP base are adjustable elements of universal support made in steel and/or iron C45 that are very useful with the alignment of the axle and the machine installation; they also avoid the use of thicknesses. CSP’s bases can be used to re-register when necessary and for specific applications You can use CSP for power supply, compressor, turbine and pump to remove any traditional problem for the alignment work Thanks to CSP bases you can reduce more than 50% the time for alignment and levelling the structure, so you can avoid the possible intervention on the...

The advantages and characteristics of Spinelli Sas’ CSP are: • Suitable materials to the required functionality • Expected correction of the required or to be reached angle • Wide range of measurement and levels of regulation • Easy to use • Improvement of installation’s time • Possibility of personalized specification under customer

The regulator CZP has been projected to be used for application in tighter spaces with adjustment between 4 mm and 14 mm article made in galvanized C45 - code CZP NR 16

CZP/G NX 25 - 4,5 CZP/G NX 25 - 5,5 CZP/G NX 25 - 6,5 CZP/G NX 32 - 6,5 CZP/G NX 32 - 9 CZP/G NX 32 - 11 CZP/G NX 45 - 11 CZP/G NX 45 - 13,5 CZP/G NX 45 - 17,5 CZP/G NX 58 - 17,5 CZP/G NX 58 - 22 CZP/G NX 58 - 26 CZP/G NX 70 - 22 CZP/G NX 70 - 26 CZP/G NX 70 - 33 CZP/G NX 80 - 26 CZP/G NX 80 - 33 CZP/G NX 80 - 39 CZP/G NX 105 - 39 CZP/G NX 105 - 45 CZP/G NX 105 - 52 FIXING LEVELLERS CZP/G NX The precision adjuster with lock-nut CZP/G the adjustment stroke is included between 4mm and 14mm. It is used in dynamic load applications where mounting bolts are not used. article made in galvanized...

The alignment device is used to align the machine horizontally and resist the horizontal forces. 19

STOP RING Note: All dimensional units are millimeters

Note: All dimensional units are millimeters

Note: All dimensional units are millimeters

Note: All dimensional units are millimeters Holes in the plate on request to your design. 23

Note: All dimensional units are millimeters

Note: All dimensional units are millimete

THICKNESS ADJUSTMENT

SUPPORT FOR ALIGNMENT CP55/65 Support for alignment CP 55/65 is suitable for loads of up to 30 t/m². The complete support for alignment consists of a foundation anchor which is poured into the concrete and the actual adjustment element which is screwed into the plates. With this element, the plate can be firmly anchored in the foundation and precisely adjusted in regard to tension and pressure. The scope of delivery comprises the complete element including the foundation anchor and steel cover for the tooluing plate. Subsequent realignment of the plate towards the engine bed is possible at...

Spinelli in addition to producing leveling machine tool quality has specialized, for a decade now, in their installation in pre-assembly phase. Manufacturers and installers know this system for the following advantages: • Savings • Reduced assembly time of the machine • Ensuring better performance of the jet grouting of leveling • Possibility of complete waterproofing and painting of the foundation. Spinelli is also able to build foundations "turnkey" by running: • Geological • Engineering and static calculations • Performance jets • Waterproofing and painting • Laying leveling • Static...

Certificate Standard TÜV Rheinland Italia S.r.l. certifies: Certificate Holder: Spinelli Accessori Macchine Utensili S.a.S. Di Spinelli D. & C. Via E. Fermi, 3 23897 Viganò (LC) Italy Design and construction of levelling systems and devices for plant and machinery 17 Proof has been furnished by means of an audit that the requirements according to ISO 9001:2015 are fulfilled. The due date for all future audits is 11-30 The certificate is valid from 2019-01-25 until 2022-01-13 First certification 2016 2019-01-25 TÜV Rheinland Italia S.r.l., Via E. Mattei, 3 I - 20010 Pogliano Milanese (MI)

SUPERIOR SOLUTION ACCESSORI MACCHINE UTENSILI Via Enrico Fermi, 3 23897 VIGANÓ (LC) ITALY