SPELLMAN HIGH VOLTAGE ELECTRONICS CORPORATION > PAGE 1 OF 2 TYPICALAPPLICATIONS SputteringCW LasersAnalytical X-rayIon Implantation Electron Beam SystemsCapacitor Charging Radar Modulators OPTIONS200-1P 200Vac Single Phase Input 200-3P 200Vac Three Phase Input SR6 power supplies are available in 18 models with voltageoutputs ranging from 1kV to 120kV. Similar to the SA4 power supplies, they incorporate series resonant inverter technol- ogy with a patented control circuit. This enables the sup- plies to operate without damage or interruption in rugged environments that frequently pose threats...

SPELLMAN HIGH VOLTAGE ELECTRONICS CORPORATION SPECIFICATIONS > PAGE 1 OF 2 TYPICALAPPLICATIONS SputteringCW LasersAnalytical X-rayIon Implantation Electron Beam SystemsCapacitor Charging Radar Modulators OPTIONS200-1P 200Vac Single Phase Input SA4 power supplies are available in 13 models with voltageoutputs ranging from 1kV to 70kV. Similar to the SR6 power supplies, they incorporate series resonant inverter technol- ogy with a patented control circuit. This enables the sup- plies to operate without damage or interruption in rugged environments that frequently pose threats to conventional high...

SPELLMAN HIGH VOLTAGE ELECTRONICS CORPORATION > SL10W-300WSL600W-1200W SPECIFICATIONS > Status Indicators: , Input: Voltage and Current Control Mode, Interlock Open and Closed, High Voltage Inhibit, Overcurrent and Overvoltage Arc, Regulation Error, Overtemperature, Over Power (Optional). Output: Voltage Regulation: 115Vac or 220Vac10%, 50/60Hz. Specify with order. 1200W model available in 200/220Vac only. Front Panel Controls: Models available from 1kV to 130kV. Each model is available in positive, negative or reversible polarity output. Load:0.005% of maximum voltage for full load change.Line:ѱ0.005%...

17.00 [431.80] 17.03 [432.49] 26 PIN TERMINALBLOCK FOR REMOTE CONTROLMONITORING2 PIN TERMINAL BLOCK LOADRETURN (CHASSIS GROUND) > 19.00 [482.60] 19.00 [482.60] 24.00 [609.60] 24.00 [609.60] HIGH VOLTAGE DANGER HIGH VOLTAGE DANGER HIGH VOLTAGE DANGER HIGH VOLTAGE DANGER IEC 320INPUT CONNECTORMATING CONNECTORAND 10ft. OFHIGH VOLTAGE CABLE SUPPLIED WITH UNIT2 PIN TERMINALBLOCK LOAD RETURN(CHASSIS GROUND) > 16.87 [428.62] 16.88 [428.62] > WARNING SPELLMAN DO NOT REMOVE HIGH VOLTAGECABLE UNTIL 3 MINUTESHAVE ELAPSED AFTERTURNING POWER OFF 1234567891011121314151617181920262521222324 HIGH VOLTAGE ELECTRONICS...

Voltage Regulation: Load:0.01% of output voltage no load to full load.Line:0.01% for a ѱ10% change in input voltage. > Current Regulation: Load:0.01% of output current from 0 to rated voltage.Line:0.01% of rated current over specified input range. > Efficiency: 80% Typical. Ripple: PTV200:0.1% p-p of output voltage.PTV350:0.2% p-p of output voltage. Switching Frequency (nominal): 45-65kHz Temperature: Operating:0ҰC to +40C.Storage:-40аC to +85C. Voltage Temperature Coefficient: 0.01%/аC Stability (voltage & current): 0.01%/hr after 1/2 hour warm-up.0.02% per 8 hours. Cooling: 200W:Convection...

Maximum RatingModel NumberMaximum RatingModel Number *Specify ғP for positive polarity or ԓN for negative polarity. J1SIGNALJ1SIGNAL 1Remote mA Program9Power Supply Fault 2Remote kV Program10+10V Reference 3Enable (L)/Disable(H)11Signal Return 4mA Monitor12Spare 5Interlock Return13Spare 6Interlock14Spare 7kV Monitor15Local mA Program 8Local kV Program Input: > DIMENSIONS: in.[mm] 85-265Vac, 47-63Hz, power factor corrected. UL > SIDE VIEW TOP VIEW BACK VIEW Ԯ rated for 85-250Vac input for 1kV to 5kV models. > 11.00 [27940] 9.00 [228.60] Power Factor (Typical): FL:0.99NL:0.98 Output: > 3.625 [92.080]...

J1SIGNAL 1Ground2+28Vdc 3High Voltage Enable/Inhibit 4Voltage Test Point: 10Vұ2%=0 to Rated Output 5Current Test Point: 10V2%=0 to Rated Output 6Voltage Programming 7Current Programming 8+10.24Vdc Reference 9Program and Test Point Return10-12Spare Input: > DIMENSIONS: in.[mm] +24Vdc ѱ10% Output: 10 models from 1kV to 60kV. Positive or negative polarity outputs. Voltage Regulation:Load: > 3.00[76.20] Static:0.01% of output voltage no load to full load.Dynamic:10V/100A Line: ձ0.01% for 10% change in input voltage. Current Regulation: > ѱ .06[24.13 ] Load:0.1% of output current from 0 to rated voltage.Line:0.05%...

*Specify PӔ for positive polarity or NӔ for negative polarity. J1SIGNALJ1SIGNAL 1Ground6Voltage Programming2+24Vdc7Current Programming 3High Voltage Enable/Inhibit8+10.24Vdc Reference 4Voltage Test Point9Program and Test Point Return 5Current Test Point DIMENSIONS: in.[mm] Input: +24Vdc 10% Output: > 0.97 [24.64] 8 models from 1kV to 30kV. Each model is available in positive or negative polarity outputs. > 3.750 [95.25] TYP 0.33[8.38] TYP Voltage Regulation: Load:Static:0.02% of output voltage for a full load change.Dynamic: 10V/100ѵA.Line: 0.01% for 10% change in input voltage. > SPELLMAN HIGH...

SPELLMAN HIGH VOLTAGE ELECTRONICS CORP.Plain view, NY 11803 MADE IN USA PART NO:MODEL:SERIAL NO.OUTPUT:INPUT: Mounting studsM3 > MP SERIES ԗ 122 PL 3.19[81] > ANALOG INPUT0 TO 10VI MON 0 TO 10VPOWER OVSYNC+24VV MON 0 TO 10VREMOTELINKLOCAL D > + SPELLMAN HIGH VOLTAGE ELECTRONICS CORP.Plain view, NY 11803 MADE IN USA PART NO:MODEL:SERIAL NO.OUTPUT:INPUT: Mounting holes 0.130 [3.3] Dia. 4 PL > MP SERIES FixingCenters > ANALOG INPUT0 TO 10VI MON 0 TO 10VPOWER OVSYNC+24VV MON 0 TO 10VREMOTELINKLOCAL

Input Current: 9Vdc, 12Vdc, or 24Vdc. Other input voltages (6Vdc to 28Vdc) available upon special order. Typically less than 1A at full output. > Maximum voltages between 300V and 15kV are available (see tables). Output voltage is proportional to the input voltage over the range 10% to 100%. Optionally, multiple outputs can also be supplied. Output Power: Output Ripple: 1.5W continuous; 3W peak 2.5W continuous; 5W peak Less than 0.2% p-p Load Regulation: 10% maximum. Module Efficiency: 55% to 70% Operating Frequency: 100kHz to 400kHz dependent on module type. Dimensions: Case Size A and E:0.79...