Overview: Spellman High Voltage Electronics Corporation specializes in high voltage power supplies for medical, industrial, and scientific applications. Their product range includes modular supplies, rack-mounted supplies, X-ray generators, and application-specific products.
Company Locations: Spellman operates globally with facilities in the USA, UK, Japan, China, Korea, Mexico, and Germany, each focusing on design, manufacturing, sales, and service.
Product Specifications: The MM Series of DC-DC converters are low-cost, general-purpose modules with output voltages up to 15kV, designed for PCB mounting with features like arc and short-circuit protection, reversible polarity, and OEM customization.
Technical Specifications: MM Series modules operate with input voltages from 9Vdc to 24Vdc, offering output power options of 1.5W and 2.5W continuous, high efficiency (55% to 70%), and compliance with EMC and Low Voltage Directives.
Applications: These power supplies are used in photomultiplier tubes, solid-state detectors, flow sensors, and analytical instruments, with application notes and circuit ideas provided for high voltage output regulation.
Customization and Options: Customization options include input and output voltages, mechanical dimensions, and input to output isolation. The MM Series also offers screened boxes.
Regulatory Compliance: Spellman is ISO 9001:2008 and ISO 14001:2004 registered, ensuring quality and environmental management standards.
Specifications: Temperature coefficient is 50ppm/°C typical, stability is less than 0.05% over 8 hours, and humidity tolerance is 0 to 90% non-condensing. Dimensions and weight vary based on voltage range.
Features: Low cost, high reliability, customizable for OEM applications, output voltages up to 3kV with a 3 watts power rating, remote control capability, and protection against arcs and short circuits.
Model Selection: Tables detail output voltage, current, and ripple for various models, specifying options for positive or negative polarity.
Environmental and Mechanical Considerations: Operating temperature range is 0°C to +50°C, with storage from -40°C to +85°C. Cooling is convection-based with specific dimensions and weight for different models.
Interface and Control: Details on interface connectors, programming, and monitoring signals emphasize ease of integration and control.
Advanced Features: The UM Series offers advanced power conversion technology with low noise and ripple, and comprehensive standard interfaces for enhanced performance and reliability.
UM Series Specifications: Available in nine voltage ranges from 8kV to 40kV, with fixed polarity, output power increments of 4, 15, and 30 watts, voltage/current regulation with automatic crossover control, and CE listed and RoHS compliant.
Cooling and Thermal Management: Modules come with an adhesive-backed heat sink for thermal management, with external cooling recommended if case temperature exceeds 65°C.
Options: Customization options include fast rise time, low temperature coefficient, terminal block connections, Mu Metal Shield, adapter board, RF tight shielded can, and eared mounting plate.
Regulatory Approvals: Compliant with EMC Directive 2004/108/EC, Low Voltage Directive 2006/95/EC, and RoHS Directive 2002/95/EC, UL/CUL recognized under File E227588.
Applications: Suitable for photomultiplier tubes, electrostatics, ion guns, spectroscopy, precision lenses, electron beam, electrophoresis, and image intensifiers.
Additional Features: Ultra-compact footprints, differential input for output voltage programming, high stability with ultra-low ripple and noise, shutdown monitor and control, and a 120% output current limit.
V-PAK, MPS, and MP Series Specifications: V-PAK offers output voltages from 1kV to 10kV, MPS provides output voltages from 1kV to 20kV, and MP is designed for high performance with output voltages up to 40kV.
Environmental and Physical Characteristics: Operating temperature ranges from 0°C to 50°C, with storage temperatures from -35°C to +85°C. Humidity tolerance is between 10% to 90% RH, non-condensing.
Applications: Suitable for photomultiplier tubes, electrostatic printing, electron and ion beams, scintillators, mass spectrometry, and nuclear instruments.
Regulatory Compliance: All models comply with the 2004/108/EC EMC Directive and the 2006/95/EC Low Voltage Directive.
230 Series Features: Modular bench top design, low ripple and noise, reversible output polarity, and 3.5 digit front panel digital metering.
MPS20W Series Features: High voltage 20 Watt modules with output voltages from 1kV to 10kV, featuring differential amplifier input for voltage programming and arc/short circuit protection.
EPM Series Features: Offers current regulation and is suitable for applications like electrophoresis and electron beam laboratory applications.
V6 Series Features: Provides regulated, fixed output polarity with options for local and remote programming, and is available in both AC and DC models.
V6D Series Specifications: Models range from 1kV to 30kV with varying current outputs from 1mA to 30mA, specify 'P' for positive or 'N' for negative polarity, and interface via a 15-pin female D connector.
SMS Series Specifications: Offers 10 models from 1kV to 60kV, with fixed polarity and 60W power output, over 80% efficiency, and arc and short circuit protection.
UMW Series Specifications: Voltage ranges from 8kV to 20kV, with power increments of 60W and 125W, voltage and current regulation with automatic crossover control, and modular sheet metal enclosed converters.
General Information: Corporate headquarters located in Hauppauge, New York, USA, with contact information provided.
SL Series Specifications: Input of 115Vac or 220Vac±10%, 50/60Hz, output models range from 1kV to 130kV, with load regulation at 0.005% of maximum voltage +500mV for full load change.
Features: Compact and lightweight design, low EMI and RFI, extensive analog and digital interface, system status indicators, arc quench, arc count, and arc trip features.
Applications: Analytical X-ray, capacitor charging, CPT/CRT testing, hipot testing, electrostatics, general laboratory use, E-beam systems, and CW lasers.
Regulatory Approvals: Compliant with EMC Directive 2004/108/EC and Low Voltage Directive 2006/95/EC, UL/CUL recognized for 300W and 600W models.
Dimensions and Weight: Dimensions vary by model, with weights ranging from 17 to 30 lbs depending on the model.
205B, 210, and SL150kV Series Specifications: Input voltage options for 115Vac or 230Vac, switch selectable, output voltage ranges from 1kV to 50kV, reversible output polarity, and current regulation set to limit at 105% of rated current.
Options: RF Isolated Output, Adjustable Overload Trip, Constant Power Control, External Fault Relay, Fine Control Voltage.
Applications: HiPot testing, CRT testing, electrostatics, E Beam systems, semiconductor processing, and general laboratory usage.
Regulatory Approvals: Compliant with EMC Directive 2004/108/EC and Low Voltage Directive 2006/95/EC.
SA, STA, and STR Series Specifications: Input voltages range from 180-264Vac, with options for single or three-phase inputs, output voltages from 1kV to 150kV, and precise voltage and current regulation.
Features: Series resonant inverter technology, arc detection and quenching, constant voltage/current operation, remote control capabilities via Ethernet and RS-232 interfaces.
Applications: Ion beam implantation, electron beam welding, capacitor charging, and high power RF transmitters.
Options and Customization: Adjustable overload trips, arc intervention features, customizable ramp times, and OEM customization.
Regulatory Compliance: Compliant with EMC Directive 2004/108/EC and Low Voltage Directive 2006/95/EC.
STR and ST Series Specifications: Input voltage of 180-264Vac, 50/60Hz, three-phase, output voltage models from 1kV to 150kV, with load and line regulation at 0.05% of full voltage/current.
Features: Local control via ten-turn potentiometers, remote control through RS-232 and Ethernet interfaces, built-in arc intervention feature, forced air cooling.
Applications: Ion beam implantation, electron beam welding, capacitor charging, and high power RF transmitters.
Regulatory Approvals: Compliance with EMC Directive 2004/108/EC and Low Voltage Directive 2006/95/EC.
X-ray Generator Specifications: Input voltage options include 115Vac±10% or 220Vac±10%, output voltage ranges up to 130kV, with low ripple and high stability.
Features: Integrated ground-referenced filament supply, local and remote programming capabilities, safety interlock and overload protection.
Applications: Plating measurement, mineral analysis, and X-ray fluorescence.
Options: Adjustable Power Trip, Arc Trip, Non-Standard Slow Start, Instant ON.
Regulatory Approvals: Compliant with EMC Directive 2004/108/EC and Low Voltage Directive 2006/95/EC.
Models and Configurations: ST Series
power supply units with parallel operation capability, XLG Series X-ray generators with output voltages up to 130kV, MNX Series compact X-ray generator modules with high voltage outputs up to 65kV.
Safety and Handling: Emphasizes the importance of not removing panels until 5 minutes after turning off equipment to reduce the risk of electrical shock.
MNX and MFX Series Specifications: Grid Bias option allows for proportional tracking of the main high voltage output, MFX series offers high voltage outputs of 0 to 50kV or 0 to 65kV, XRF series provides output power of 80W, 320W, or 640W at up to 160kVdc.
Control and Monitoring: Analog and digital control inputs and outputs, with specific voltage programming and monitoring capabilities.
Safety and Compliance: Includes safety interlocks and compliance with relevant EMC and Low Voltage Directives.
DXM and DXB Series Specifications: Input voltage ranges from 90-264Vac for 300W units and 180-264Vac for 600W and 1200W units, output voltage models range from 20kV to 70kV for DXM and 40kV to 140kV for DXB.
Control Interface: Local and remote interfaces include USB, Ethernet, and RS232, with control software available for diagnostics and monitoring.
Applications: Suitable for plastics sorting, crystal inspection, plating measurement, mineral analysis, and more.
Safety and Compliance: Compliant with EMC and Low Voltage Directives, ISO 9001:2008 and ISO 14001:2004 certified.
Dimensions and Weight: 300/600W units measure 4.75" H x 6" W x 12" D and weigh 14 pounds, 1200W units measure 4.75" H x 12" W x 12" D and weigh 26 pounds.
X-ray Generator Models: XLF series offers output voltages up to 60kV, DF/FF series features a new inverter design, XRV series provides compact, high-performance generators with output voltages ranging from 160kV to 450kV.
Features: Local and remote programming, safety interlocks, short-circuit and overload protection, advanced resonant conversion techniques.
Applications: Plastics sorting, crystal inspection, diamond inspection, X-ray diffraction (XRD), and X-ray fluorescence (XRF).
Options and Customization: Adjustable power trip, arc trip, non-standard slow start, instant ON features, OEM customization available.
Connectors and Interfaces: Detailed pinout information for various connectors, including RS-232, USB, and high voltage outputs.
Regulatory Compliance: Compliant with relevant EMC and Low Voltage Directives.
Dimensions and Cooling: Fan-cooled for efficient operation.
Monoblock® X-Ray Sources Specifications: Input voltage ranges from 90-264Vac for models XRB201 and XRB202, and 230Vac for XRB301, X-ray tube voltage adjustable between 80kV to 160kV.
Interfaces: Analog and digital interfaces, RS-232 for XRB201 and XRB202, RS-422 for XRB301.
Features: Universal input with power factor correction, compact and lightweight design, integrated high voltage supply, filament supply, X-ray tube, beam port, and control electronics.
Applications: Food inspection, fill level confirmation, security applications, and plating measurement.
Regulatory Compliance: Compliant with EMC Directive 2004/108/EC and Low Voltage Directive 2006/95/EC.
Safety and Warnings: X-ray leakage controlled to meet FDA and OSHA standards, warnings against connecting AC input power with the cover removed.
LPX Series Specifications: Input line requirements automatically adapt to 100-130Vac or 200-250Vac, X-ray output ranges from 5 to 160kV and 0.1 to 5.0mA.
Key Features: Microprocessor-driven control unit, adjustable in 1kV and 0.1 mA increments, 100% duty cycle, optional accessories like a laser pointer and tubehead stand.
Applications: Aerospace, manufacturing, defense, aviation, energy, and security systems.
Environmental and Safety Considerations: Designed to operate efficiently in various environmental conditions, with guidelines for coolant mixtures and safety precautions.
LPX200 and LPX300 Models Specifications: Input line requirements adapt to 100-130Vac or 200-250Vac, X-ray output ranges from 10 to 300kV and 0.1 to 10.0mA.
Safety and Accessories: Includes safety devices like pressure relief valves, thermal cut-outs, and a coolant flow sensor, standard accessories include an operation manual, carrying case, cables, and a coolant hose.
Optional Accessories: Laser pointer for precise targeting, hydraulic tube head stand for support and rotation.
Additional Products: LPX1620 Tubehead Stand, Capacitor Charging Module (CCM).
Regulatory Compliance: ISO 9001:2008 and ISO 14001:2004 certified.
FIBX Custom Multiple Output Power Supply: Designed for focused ion beam applications, featuring a modular design, controlled via a fiber optic isolated RS232 interface, compliant with CE, IEC, UL, and SEMI standards.
VS100 High Voltage Power Supply: Designed for precision electron beam applications, offers ultra-low ripple and excellent stability.
ESC Series Electrostatic Chuck Power Supply: Provides clean and accurate voltages for electrostatic chuck wafer processing.
CZE1000R Auto-Reversing Power Supply: Features a hot-switched reversible output voltage, adjustable output voltage and current, and excellent regulation and stability.
Applications: Transmission scanning electron microscopy, semiconductor analysis, ion beam etching, micro-optics, semiconductor lithography, electrospinning, mass spectrometry, and electrostatic research.
CZE1000R Terminal Block: 14-pin terminal block for auto-reversing power supply, recommended to use a high voltage safety interlock switch.
CZE2000 Auto-Reversing Power Supply: Designed for OEM applications requiring reversible output voltage, features remote programmability, low ripple, and excellent load and line regulation.
DGM Custom OEM Power Supplies: Developed for image intensifier applications with multiple output voltages.
MCP High Performance DC-DC Converter: Features a floating 3kV output, isolated to 16kV, with low ripple.
ML430 High Voltage Module: Designed for driving high voltage amplifiers with dual output.
General Features: All modules are compliant with EMC and Low Voltage Directives, ISO 9001:2008 and ISO 14001:2004 certified.
ML1350 High Voltage Module: Designed for quadrupole drivers and electrostatic lenses, features arc and short circuit protection, remote enable control, and compliance with CE and UL standards.
MX2.5 High Performance DC-DC Converter: Features hot switchable polarity reversal and low ripple, ideal for mass spectrometry.
MX8 Plus DC-DC Converter: Fast polarity reversing capability within 25ms, features high stability, low ripple, and RoHS compliance.
MX10 High Performance DC-DC Converter: Hot switchable polarity reversal with low ripple, suitable for mass spectrometry.
General Features: All products are compliant with relevant EMC and Low Voltage Directives, designed for easy integration into OEM systems with customizable options.
MX10 Plus Specifications: Input Voltage: +15Vdc, ±0.75Vdc, Output Voltage: ±10kV, remotely reversible, Output Current: 10µA.
MX20 Specifications: Input Voltage: +24Vdc, ±1.2 volts, Output Voltage: ±500Vdc to ±20kV, Output Current: 0 to 100µA max.
TOF3000 Specifications: Input Voltage: +24 Vdc, +5%, -2%, Output Voltage: 0 to 30kV, Output Current: 0 to 400 microamperes.
PMTS Specifications: Input Voltage: +15Vdc, ±5%, Output Voltage: 0 to 1000 volts, Output Current: 20 microamps max.
Key Features: High stability and low ripple for precise applications, remote control capabilities for output polarity and voltage, compliance with international safety and environmental standards.
Specifications: Dimensions and Weight: The PFE equipment measures 23.64”W x 23.64”D (600mm x 600mm) and weighs 900 pounds (335.9kg).
Regulatory Approvals: Compliant with EMC Directive 2004/108/EC, Low Voltage Directive 2006/95/EC, and other standards like GR-63-CORE, EN 60950.
XRV Controller: Features a touch screen interface, Intel Atom N270 CPU, 1GB RAM, and a 7” LCD, supports RS-232 and Ethernet communication.
SIC Interface: Offers RS-232, Ethernet, and USB communication with a 40MIPS digital signal processor.
HVD Dividers: Available in models for 100kV, 200kV, and 400kV with high input impedance and 0.5% accuracy.
Procedures and Safety: Handling: Two-person handling is required for certain components due to weight considerations, Safety: High voltage equipment should never be considered safe to touch.
Recommendations: Ensure fan filters are in place for safe operation of PFE, use high-quality, double-shielded cables in high EMI environments, follow comprehensive safety practices to ensure user safety.
Contact Information: Spellman High Voltage Electronics Corporation is headquartered in Hauppauge, New York, with locations worldwide including the UK, Japan, China, and Korea.
Diagnostic X-Ray Generators
POWER SUPPLY SELECTION GUIDE
