CS Q-LEAP™ P-SINE with SE-09

1 / 2 PagesView full catalog

CS Q-LEAP™ P-SINE with SE-09

Product catalog summary

Key Features:

Supports various transducers including PE, IEPE, VC, PR, and digital transducers with interfaces like SPI, I2C, DTI.
Compatible with vibration meters, laser vibrometers, and vibration calibrators.

Primary Calibration System:

CS Q-LEAP™ P-SINE with SE-09 features a high-frequency vibration exciter.
Includes HERO™ vibration controller with signal conditioners and CS Q-LEAP™ software for sine calibration, sine sweep, vibration measurement, and generation.

Standards Compliance:

ISO 16063-11, ISO 16063-21, ISO 16063-41, and ISO 17025.

Technical Specifications:

Frequency range: 5 Hz to 20 kHz (up to 50 kHz without traceability).
Max acceleration: 400 m/s² (40 gn) peak.
Max velocity: 0.5 m/s (19.7 inch/s).
Max displacement: 7.5 mm (0.3 inch).
Max DUT weight: 350 g (12 oz).
Laser vibrometer: Class 2 helium-neon laser with 632.81 nm wavelength.

Calibration and Measurement:

Traceable to PTB (German National Metrology Laboratory).
Integrated sensor database and software for generating calibration certificates.
Easy data exchange with ERP systems and measuring equipment databases.

Measurement Uncertainty:

Expanded measurement uncertainty varies with frequency range and payload.
Reference frequencies include 80 Hz, 100 Hz, and 160 Hz.

Recommended Excitation Amplitudes:

Minimum: 0.1 m/s².
Maximum (high payload): 4 mm (5 Hz to 12 Hz), 0.3 mm/s (12 Hz to 53 Hz), 100 m/s² (53 Hz to 40 kHz).
Maximum (low payload): 4 mm (5 Hz to 12 Hz), 0.3 mm/s (12 Hz to 106 Hz), 200 m/s² (106 Hz to 20 kHz).

Catalog excerpts

Primary calibration system with high frequency vibration exciter HERO™ vibration controller incl. signal conditioners wave-sine Typical DUT CS Q-LEAP™ software • sine calibration • sine sweep • vibration measurement • vibration generation • IEPE transducer • digital transducer with SPI, I2C, DTI, and many other interfaces • vibration meter • laser vibrometer • vibration calibrator high-frequency vibration exciter clipboard-check Standards Power amplifier PA 500 DM all-digital laser vibrometer incl. vibration isolation and positioning device for the laser head • ISO 16063 -11: Primary calibration of vibration transducers • ISO 16063 - 21: Calibration of vibration transducers by comparison to a reference transducer • ISO 16063 - 41: Calibration of laser vibrometers • ISO 17025: General requirements for the competence of testing and calibration laboratories Key features Frequency range 5 Hz ... 20 kHz (50 kHz) Traceable to PTB (German National Metrology Laboratory) Calibration of vibration sensors, measurement systems and calibrators Integrated sensor database Integrated software for the generation of calibration certificates (print, PDF,...) Easy data exchange with applications like ERP systems or measuring equipment databases

Open the catalog to page 1

Technical data CS Q-LEAP™ P-SINE with SE-09 Frequency range 1) Requires software option for phase response measurements 2) Determined according to GUM (JCGM 100 „Evaluation of measurement data - Guide to the expression of uncertainty in measurement") with k = 2 (coverage factor) for the best possible device under test (DUT). Other devices that are not assumed as ideal must be evaluated with individual contributions. 3) Valid for electrical sensor signals > (1 mV or 1 pC) 4) Maximum vibration amplitude for maximum payload (DUT) 5) Maximum vibration amplitude without any payload (DUT) Latest update:...

Open the catalog to page 2