Pressure regulator Product features • Piston pressure regulator with balanced main • For non-corrosive industrial gases • Single-stage with high control accuracy • Central filter in the pressure regulator • Safety pressure gauge acc. to DIN EN 562 • Pressure regulator with integrated relief valve • Pressure regulator for oxygen with filter in inlet • Accessories like wall brackets and in-/outlet fittings are also available Technical Data Body regulator: Valve seat: Pressure gauge ports: Outlet relief valve: Temperature range Leak rate Flow rates and performance factor for the pressure regulator U15 The table below indicates approximate values for the flow rate in standard cubicmeters of compressed air at the indicated operating conditions. The flow rates for other gas types may be calculated using the conversion factors from the table on the right. For detailed flow rate calculations please refer to our data sheet "Performance diagram". Conversion factors Data sheet DES U15 Edition 0912 Subject to alteration without prior notice © Spectron Gas Control Systems GmbH Spectron Gas Control Systems GmbH [email protected] www.spectron.de

Pressure regulator U15 spectro tec Dimensions and connections of the pressure regulator U15 Dimensions with wall bracket 512.07600 (as accessorie available) Dimensions (front view) 65 30 approx.84 G 3/8" approx. 100 Ø7 M24x1,5 G1/2” 138 only for oxygen 35 approx. 97 Ø 102 Ordering information: Pressure regulator U15 In- and outlet-fittings: see data sheet “Fittings” U15 - NFG - 300 Type of gas Inlet pressure P1 NFG - non flammable gases FG - flammable gases O2 - oxygen 40 - max. 40 bar 200 - max. 200 bar 300 - max. 300 bar Data sheet DES U15 Edition 0912 Subject to alteration without prior notice...