video corpo

MED

MED

MED

Product catalog summary
Overview: The document provides technical specifications and features of Spectromed's gas supply systems designed for hospitals. These systems are crucial for ensuring a reliable supply of medical gases such as oxygen, compressed air, and nitrous oxide.
Product Features:
  • Central gas supply system with automatic change-over function.
  • Compatible with cryogenic tanks and up to two batteries of gas cylinders.
  • Designed for various gases including oxygen, compressed air, synthetic air, nitrous oxide, carbon dioxide, and nitrogen.
  • Flow rates supported up to 25 or 100 m³/h.
  • Pressure regulators with high control accuracy and dual-stage pressure reduction.
  • Safety features include pressure gauges, safety relief valves, and compliance with ISO 7396-1 and 10524-2 standards.
  • Redundant system design for reliability.
Technical Specifications:
  • Inlet pressure up to 300 bar and outlet pressure up to 6 bar.
  • Materials used include brass for piping and stainless steel for battery systems.
  • Temperature range from -30°C to +60°C.
  • Leak rates are less than 10 mbar l/s He.
  • Various connection types and sizes are specified for different components.
Control and Alarm Systems:
  • FLOMED control system for solenoid valves with operation mode display and line pressure monitoring.
  • Floalarm D10 and A5 systems for digital and analog signal alarms, respectively.
  • Potential free outputs for signal transmission and differentiation between middle and high alarms.
Manifold and Connection Systems:
  • Manifold system supports 2-6 gas cylinders with options for shut-off and check valves.
  • Flexible connections available with pigtails or stainless steel corrugated hoses.
  • Ordering information includes specifications for manifold systems and flexible connections.
Ordering Information: Detailed ordering codes are provided for various components such as the change-over panel, manifold system, and flexible connections, allowing customization based on specific hospital needs.
See more

Catalog excerpts

MED-1

Gas supply systems for hospitals

 Open the catalog to page 1
MED-2

Technical data Product features Change-over-panel MED • Central gas supply system with automatic change-over function for hospitals • For operation with a cryogenic tank and up to 2 batteries of gas cylinders • Including connections for 2 manifolds for gas cylinders • Designed for oxygen, compressed air, synthetic air, nitrous oxide, carbon dioxide or nitrogen • For flow rates up to 25 or 100 m³/h • Suitable for gas cylinder pressure (emergency supply) up to 300 bar • Pressure regulators with high control accuracy • Dual stage pressure reduction • Safety pressure gauge according to DIN EN 562...

 Open the catalog to page 2
MED-3

Gas supply systems for hospitals Ordering information: Panel MED - cabinet (for FLOMED P) - plate (for FLOALARM) Pressure gauge - automatic change-over with differential pressure - automatic change-over with solenoid valves (NO) V - automatic change-over with solenoid valves CA - cabinet Data sheet DES MED - Edition 1007 Subject to alteration without prior notice © Messer Cutting & Welding GmbH - pressure gauge - contact pressure gauge - pressure tranducer 2U - automatic change-over with differential pressure PL - plate

 Open the catalog to page 3
MED-4

Ordering information: Manifold system MBS Cylinder brackets - left - right - with cylinder brackets - without cylinder brackets Cylinder manifolds Check valve* for 2 gas cylinders in line for 3 gas cylinders in line for 4 gas cylinders in line for 5 gas cylinders in line for 6 gas cylinders in line - single - double * You have to choose at least a check valve or shut-off valve - with check valve - without check valve - Shut-off valve for each cylinder - without shut-off valve Messer Cutting & Welding GmbH Lärchenstr. 139a, D-65933 Frankfurt Tel. +49 (0)69 38016-0, Fax +49 (0)69 38016-200 [email protected]...

 Open the catalog to page 4
MED-5

Control systems and Flexible connections Ordering information: Control system FLO FLOMED P Control system with 10 digital and 4 analog inputs for contact pressure gauges and pressure transmitters FLOALARM A5 Alarm system with 5 analog inputs for e.g. pressure transmitters FLOALARM D10 Alarm system with 10 digital inputs for e.g. contact pressure gauges Ordering information: Flexible connection MSO - pigtail - top version MSU - pigtail - bottom version MFS - stainless steel corrugated hose (1m) MSO - pigtail - top version MSU - pigtail - bottom version - oxygen - compressed air - synthetic air...

 Open the catalog to page 5
MED-6

Manifold system MBS Extension 25 cm (VR 25) 1500 525 Example for a central gas supply system Main line 4400 Data sheet DES MED - Edition 1007 Subject to alteration without prior notice © Messer Cutting & Welding GmbH Cryogenic tank Messer Cutting & Welding GmbH Lärchenstr. 139a, D-65933 Frankfurt Tel. +49 (0)69 38016-0, Fax +49 (0)69 38016-200 [email protected] www.messer-cw.de

 Open the catalog to page 6

All Spectron Gas Control Systems GmbH catalogs and technical brochures

  1. Flostop TS

    1  Page

  2. Floswitch D4

    1  Page

  3. FE52 exact

    2  Pages

  4. FE51-SP

    2  Pages

  5. LM61/LM62

    2  Pages

  6. DVM

    2  Pages

  7. BM65-2L

    2  Pages

  8. EM65-AC

    1  Page

  9. FM 52 exact

    2  Pages

  10. FM 45

    2  Pages

  11. sPECTROCOM

    2  Pages

  12. Hydrosorb

    1  Page

  13. LT2000

    2  Pages

  14. FL32

    1  Page

  15. ET2000V

    2  Pages

  16. ET65-BV

    4  Pages

  17. HDS

    2  Pages

  18. BU13+15-2U

    2  Pages

  19. BU13

    4  Pages

  20. BT2000 AC

    2  Pages

  21. ZT300

    2  Pages

  22. Catalogue

    20  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.