Line pressure regulator LT2000 Line pressure regulator LT2000-40-10-NFG Line pressure regulator LT2000-300-25-NFG Product features Technical data • Ergonomically designed line pressure regulator Type Inlet pressure P1 Outlet pressure P2 for P1 < 40 bar: for P1 > 40 bar: • For non-corrosive technical gases • Single-stage type with high control accuracy • Central filter in the regulator • Safety pressure gauges acc. to DIN EN ISO 5171 • Compact design • Models for inlet pressure up to 300 bar available • Pressure regulator with integrated relief valve (for inlet pressure > 40 bar) • Piston type regulators for outlet pressure values of up to 50, 100 or 200 bar available Materials Body, bonnet: Brass Diaphragm regulator: EPDM Valve seat regulator: EPDM for P1 < 40 bar: EPDM for P1 > 40 bar: PA Connectors In- / outlet: 1/4”-NPT female Outlet relief valve (P1>40 bar):1/8”-NPT female Temperature range -30°C to +60°C -3 Leak rate <10 mbar l/s He Weight for P2 < 20 bar: approx. 1.3 kg for P2 > 20 bar: approx. 1.5 kg Flow rates pressure regulators LT2000: Flow rate (Vn) [m3/h] at outlet press. (P2) [bar] Oxygen Inlet press. (P1) [bar] Data sheet DES LT2000 Edition 0112 Subject to alteration without prior notice © Spectron Gas Control Systems GmbH The flow rates for other pressure values can be found in the data sheet Performance diagram. Performance factor of LT2000: L10 = 3 For other gas types the flow rate must be multiplied with these factors: Nitrogen Hydrogen Argon Carbon dioxide Helium Spectron Gas Control Systems GmbH Fritz-Klatte-Str. 8, D-65933 Frankfurt Tel.: +49 (0)69 38016-0, Fax: +49 (0)69 38016-200 [email protected] www.spectron.de

Line pressure regulator LT2000 Dimensions ca. 166 1/8"-NPT Relief valve: Only available for line pressure regulators for inlet pressure values of up to 300 bar and for outlet pressure values of up to 50 bar! rear view / mounting Ordering information: Line pressure regulators LT2000 Specifications • SPECTROTEC - components guarantee maximum quality by using high grade materials and a quality assurance program acc. to DIN ISO 9001 • All components which come into contact with the medium are cleaned free of oil and grease before the assembly. • SPECTROTEC - components undergo a 100% leak- and function...